33-50mm offset in inches = -17
4.5 inches
The recommended distance for a toilet to be offset from the wall is typically around 15 inches.
5.91 inches
46mm or 1.8 inches
In pipefitting, a rolling offset is used to connect two pipes that are not aligned in the same plane. The formula for calculating a rolling offset involves using trigonometry, specifically the Pythagorean theorem and the tangent function. The formula is: Offset = (Travel x tan(Angle)) + (Run / 2), where Travel is the vertical distance between the two pipes, Angle is the angle of the offset, and Run is the horizontal distance between the two pipes.
Toilets typically come in two standard size offsets: 10 inches and 12 inches. The 12-inch offset is the most common in modern homes, while the 10-inch offset is often found in older installations. Additionally, there are some toilets designed for a 14-inch offset, primarily for specific applications or renovations. It's essential to measure the distance from the wall to the center of the drainpipe to ensure the correct fit.
Stock is 16x7 inches, 5x114.3mm bolt pattern (5x4.5 inches), +37mm offset. -Jeff Lange- from Supramania
I have a stock wheel, which seems to sit 1.92 inches from center. That's what I measured, anyways.
The wheel bolt pattern for the 2007 Saturn Aura is 5 x 4.33 inches or 5 x 110 millimeters. The offset is high positive.
tool offset drill offset
The wheel bolt pattern for the 1993 Toyota Supra is 5 x 4.5 inches or 5 x 114.3 millimeters. The stud size is 12 x 1.5 and the offset is high positive.
offset