0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is 4 mil thick in inches?
A 4 mil thickness is four thousandths (0.004) of an inch.
What is 120 mil thickness in inches?
It is approx 4.7 inches.
What is the difference in thickness between a mic and mil?
a mic is 1/1000 of a mil, so it is 1000 times less thick
What is the difference between Mil and Gauge thickness in pool liners?
See this link: http://www.backyardcitypools.com/vinyl-pool-liners/Mil-Vs-Gauge.htm
Is 30 mil the same thickness as 30 mm?
No. Mils are much smaller than mms.
What is 4 mil thick in inches?
A 4 mil thickness is four thousandths (0.004) of an inch.
What is ratio of gauge to mil in plastic thickness?
Mil to Gauge ratio
What is the thickness of mil-a-8625?
My dik
What is a 3 letter word for thickness?
-Mil
How thick is 45 mil?
about the thickness of a dime
What is mil dft?
1 mil (1/1000-inch) dry film thickness
When measuring vinyl thickness are Gauge and Mil the same?
no
Is typical thickness of pcb 2mm?
The standard pcb thickness is 1.57mm, 0.063", or 63 mil.
Is there a formula to figure dry paint mil thickness if you have the percent solids of the paint?
It depends on the application process and what are you painting. Mils can vary based on how you apply the paint and with what applicator. It is not based on the solids percentage. This may create a variable that cannot be included in a fixed formula. To measure paint that is already dry you can use a mil gauge. For more info on applying paint go to the appended website. (Added) That's correct when you have only the percentage solids by weight, however when you apply the paint correctly, at the wet mil thickness specified by the manufacturer, you can figure the dry mil thickness by multiplying the wet mil thickness (often 4 mils for ordinary house paint) and the percent solids by volume of the paint. To measure the wet paint thickness, which you should do while applying to ensure that it is being applied at the correct thickness, use a wet mil gauge. For example, 4 mils with a paint that is 25% solids by volume will dry down to 1 mil thickness. A high build elastomeric coating applied at 10 mils at the same 25% solids will dry down to 2.5 mils.
What is the abbreviation 'mil' referring to when in reference to enviro liners?
'Mil' is an abbreviation for 'millimeter' when referring to the thickness of environmental liners. It is used to measure the gauge or thickness of the liner, with a higher mil indicating a thicker liner that offers more protection against leaks or punctures.
What is 120 mil thickness in inches?
It is approx 4.7 inches.
What is the difference in thickness between a mic and mil?
a mic is 1/1000 of a mil, so it is 1000 times less thick
