It is approx 4.7 inches.
Wiki User
∙ 6y agoA 4 mil thickness is four thousandths (0.004) of an inch.
There is slightly more than 25 millimetres in an inch, so 75 millimetres = 3 inches approx. <><><><><> Most times, the mil is a unit of thickness in thousandths of an inch, so 75 mil is 0.075 inches thick. Depending on what you are looking at, 75 mil is quite thick. For instance, a typical plastic garbage bag might only be 1 or 2 mils thick.
a mic is 1/1000 of a mil, so it is 1000 times less thick
A "mil" is a 1/1000 of an inch. So 6 mil is equal to 0.006 inches.
120 feet, in feet and inches, is 120 feet and 0 inches.
A 4 mil thickness is four thousandths (0.004) of an inch.
The ratio of gauge to mil in plastic thickness is 1 gauge = 0.1 mil. This means that for every 1 gauge increase, the thickness increases by 0.1 mils.
My dik
28-gauge wire typically has a thickness of about 0.32 millimeters or 0.0126 inches.
-Mil
about the thickness of a dime
1 mil (1/1000-inch) dry film thickness
120 lb paper is typically around 0.003 inches (0.076 mm) thick. The weight of paper is a measurement of its density, not its thickness, so the thickness can vary depending on the type of paper and its composition.
4.7 mil paper is thicker than 20 lb paper. Mil is a unit of measurement used to describe the thickness of paper, with 1 mil equal to 0.001 inches. Therefore, 4.7 mil paper would be approximately 4.7 times thicker than 20 lb paper.
no
There is slightly more than 25 millimetres in an inch, so 75 millimetres = 3 inches approx. <><><><><> Most times, the mil is a unit of thickness in thousandths of an inch, so 75 mil is 0.075 inches thick. Depending on what you are looking at, 75 mil is quite thick. For instance, a typical plastic garbage bag might only be 1 or 2 mils thick.
The standard pcb thickness is 1.57mm, 0.063", or 63 mil.