0
An electrical panel for 3 phase power with three hot connections and a neutral bar. It's capacity would be 200 amps on each of the three legs.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Can you connect Two wires to one main lug in a panel board?
Two wires can be connected to one main lug in a panel board if the lug is designed to hold two wires. The data will be written on the lug.
Do you need a main dissconnect for a 400 amp 3 phase service?
No, you can use the six main rule. This means you would have a 400 amp main lug panel, with six breakers or less, but no more than six. You can also use six individual disconnects.
Which terminal on a 15 amp household breaker does the hot wire feed into and which one does it come out?
On a 15 amp household breaker there is no terminal on the in feed of the breaker. The breaker either plugs into the distribution panel's bus bar or it bolts to the distribution's bus bars. The feed conductor connects to the load side of the breaker at its terminal lug.
Can you tie the neutral wire on a sub feed to another panel to the main neutral lug?
no
Are siemens breakers compatible with GE boxes?
Yes, as long as the lug connects to the panel thye same way.
Can you connect Two wires to one main lug in a panel board?
Two wires can be connected to one main lug in a panel board if the lug is designed to hold two wires. The data will be written on the lug.
Can a200 amp breaker lug handle a?
Handle a "What"?
Do you need a main dissconnect for a 400 amp 3 phase service?
No, you can use the six main rule. This means you would have a 400 amp main lug panel, with six breakers or less, but no more than six. You can also use six individual disconnects.
Lug nut size on Nissan 240sx?
The lug nut size for a 240sx with a four lug pattern is 10x1.25. The lug nut size is 12x1,25
Which terminal on a 15 amp household breaker does the hot wire feed into and which one does it come out?
On a 15 amp household breaker there is no terminal on the in feed of the breaker. The breaker either plugs into the distribution panel's bus bar or it bolts to the distribution's bus bars. The feed conductor connects to the load side of the breaker at its terminal lug.
Where is the lug wrench on a 1999 Ford Explorer?
At the rear of the vehicle, in the cargo compartment, there should be a panel on the left side. Remove that, and the jack and lug wrench will be in there.
Would a four lug rim fit a 2000 Chevy s10?
No. The S10 has five lug rims.
How do you measure bolt patterns?
Measure from center of one lug (stud that the lug nut bolts on to) to the center of the lug directly across from it if you have four-, six-, or eight-lug hubs. Measure using the metric side of the ruler, in millimeters. So if you have a four-lug hub and the measurement came out to 100mm, the bolt pattern is 4 X 100, which means that you have four lugs and that the separation is 100mm. Measure from the center of one lug to the center of the third stud (the one to either side of the center opposite) if you have a five-lug hub.
Can you tie the neutral wire on a sub feed to another panel to the main neutral lug?
no
Where is the amp in a 94 Ford Explorer?
The factory amp is mounted in the cargo compartment, inside the rear hatch on the immediate left. It is directly across from the jack and lug wrench compartment.
How many lug nuts per wheel on a 2006 cobalt LS?
There are four lug nuts per wheel
Cobalt wheel bolt pattern?
if its four lug its 4x100mm
