0
cross beam, crossbeam
1. A large beam between two walls.
2. A girder that holds the sides of a building together.
3. Any beam that crosses another.
4. A strut between the walings on opposite sides of an excavation.
5. A beam which runs transversely to the center line of a structure.
6. Any transverse beam in a structure, such as a joist.
Advertisement
Above retrieved from Answers.com
Viper1
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What is cross beam?
cross beam, crossbeam1. A large beam between two walls.2. A girder that holds the sides of a building together.3. Any beam that crosses another.4. A strut between the walings on opposite sides of an excavation.5. A beam which runs transversely to the center line of a structure.6. Any transverse beam in a structure, such as a joist.AdvertisementAbove retrieved from Answers.comViper1
How strong is steel I beam?
If the beams are made of the same thickness and cross-sectional dimensions the box beam is twice as strong, vertically and the same strength horizontally. However, if a diagonal force is applied, the box beam could collapse where the I-beam is less likely to do so.
What is t beam?
It is a monolythic concrete beam consisting of a web and a flange to form the shape of a"T" .
How are beam bridges and arch bridges similar?
both for short like places and both bridges
What is the difference between the singly reinforced beam and doubly reinforced beam?
A singly reinforced beam only has steel reinforcement on the tension side (along the bottom of the cross section) where as a doubly reinforced beam has steel reinforcement on both the tension and compression sides, ie. the top and bottom of the cross section.
What is a prismatic beam?
A beam with a uniform cross-section.
What is the total volume of a 60ft beam?
The answer depends on the cross-sectional area of the beam.
What are cross brace?
A cross brace is a cross beam which connects between the arches in the mininng tunnels.
When an antenna has a gain of 44dB then assuming that the main beam of the antenna is circular in cross-section the beam width will be?
2.44560
What is cross beam?
cross beam, crossbeam1. A large beam between two walls.2. A girder that holds the sides of a building together.3. Any beam that crosses another.4. A strut between the walings on opposite sides of an excavation.5. A beam which runs transversely to the center line of a structure.6. Any transverse beam in a structure, such as a joist.AdvertisementAbove retrieved from Answers.comViper1
What does cbr stand for in Honda motorcycles?
Cross Beam Racer
How do you replace the front cross beam on a 1992 four door Honda Accord?
Hey Franklin==What are you refering to as a cross beam??? Joe Hey Joe, The crossbeam I'm referring to is part of the frame. The tie rods connect to the crossbeam. The beam is damaged and one tie rod cannot be adjusted to correctly align the tire. Franklin : The 'cross beam' is called the rack and pinion assembly, and is not part of the frame.
What is the difference between an you beam and a beam?
An 'U' beam is a beam that is shaped like the letter 'U'. It is usually made of 3 parts; 2 sides and 1 bottom piece. A beam would normally refer to an 'I' beam (A beam that is shaped like the letter 'I'). The difference is that cross section of the beams are different.
What is the weight carried by the cross of Jesusas?
The part of the cross that Jesus had to carry was the cross beam. These typically weighed between 75 pounds and 125 pounds.
What are the changes required for variable cross sectional beam?
deflection, movement of inertia,
What is the full form of cb in unicorn bike?
"CB" stands for "Cross Beam".
What did the cross of Jesus look like?
In Bible times, crucifixion involved the fastening of an individual to a cross. These crosses, like that of Jesus Christ, consisted of one long wooden beam, with a shorter beam fastened to it perpendicularly close to the top.
