Some men can get up to over an inch, but it's more common to see thicknesses below that.
4 feet 6 inches
It depends of the piece of wood itself and the type of wood that it is.
100cm
An inch is equivalent to 2.54cm. If a piece of wood is 3/4 of an inch thick, it is about 1.9cm (19mm) thick, therefore to create a 0.5cm (5mm) thick piece from this it would be necessary to cut the excess 14mm off.The method to use for this will depend on the shape and size of the piece of wood.For a small piece of wood, it could be marked around the edges, clamped in a work vice and hand sawn to give the desired thickness. Sanding the wood afterwards will bive a neat smooth finish.When cutting, be careful not to place fingers in the path of the saw, and clamp the work-piece securely. You can put thin card or wood either side of the work-piece to prevent it being damaged by the clamp, but make sure these are clear of where you need to cut.A small area could be cut down in thickness by using a router or a chisel. If you have not used either of these before, get some help and practice on scrap pieces first.For a slightly larger piece, a very coarse sandpaper on a belt sander can quickly remove material or you could use a plane.For large pieces use a thicknesser. If you do not have access to one of these, call joinery workshops and ask whether one would do this small job for you. This will give the neatest finish.
log
log
It is Steel( it was in my homework)
They were as thick as thieves when they were together. John needed to find a piece of wood as thick as possible for the job.
A staff cannot bite, it is a thick piece of wood.
False
87
5 1/3 Board Feet.
Yes as long as the wood is not to thick.
There are three types of wood flooring: solid, engineered, engineered floating. Solid is natural wood usually 3/4" thick. Engineered is solid piece of wood on top of compressed wood the wood is usually 1/4" thick and the compressed wood is anywhere from 1/4" to 1/2" thick. Engineered floating is thin solid piece of wood on top of compressed wood, it is thin enough so during installation it does not have to be attached to the subfloor. The solid wood is usually about 1/8" thick and the compressed is 1/4" thick. All these three types come in all different types of wood species such as bamboo.
board
This depends on the type of wood and how evenly distributed both the load and the supports for the piece of wood are.