0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What do you call a long cylinder?
A cylinder? A cylinder is still a cylinder regardless of how long it is.
Which characteristic do a cylinder and a sphere NOT have in common?
A cylinder has a plane face.A cylinder has a plane face.A cylinder has a plane face.A cylinder has a plane face.
Objects that has a cylinder shape?
Is a cylinder!
What is a negative - positive?
Negative * positive = negative Positive * positive = positive Negative * negative = positive
Does a negative plus a negative equal a postive?
No, a negative plus a negative is a negative
What active material on the positive plate and the negative side of the plate of a car battery?
THE machine consists 3 major cylinders, Plate cylinder, Blanket cylinder and impression cylinder
How do you replace fuel injector in cylinder?
There are five steps on how to replace the fuel injector in a cylinder. Some of the step-by-step instructions are disconnect the negative battery cable, relieve the fuel pressure, and remove the cylinder head cover.
How do you replace the master cylinder with abs attached to the master cylinder on a 1995 grand am?
In order to replace the master cylinder with ABS attached to the master cylinder on a 1995 Grand Am you will need to complete the following steps: Disconnect the negative battery cable. Locate the master cylinder which is attached to the drivers side of the firewall. Remove the ABS brake line from the master cylinder using a wrench. Disconnect the fluid hose from the master cylinder using a wrench. Unscrew the nuts that hold the master cylinder in place. Remove the master cylinder and install a new one. Reattach the fluid hose to the master cylinder. Reattach the ABS brake line to the master cylinder. Tighten all the nuts and bolts and reconnect the negative battery cable.Once all of these steps have been completed you can be sure that your master cylinder has been properly replaced and is ready for use.
What is the first step taken when removing the cylinder head?
Probably draining the radiator. Unhook the negative battery cable.
How do you install an ignition key cylinder on a 1993 Grand Marquis?
you will see a small hole directly below the key cylinder turn the ignition to "run" not "on" put a wire or punch in the whole to disengage the retaining pin while pulling on the lock cylinder at the same time. ALSO DISCONNECT THE NEGATIVE BATTERY CABLE AND AS A PRECAUTION DISARM THE AIRBAG.
How do you change the ignition lock cylinder on your 2001 Dodge Durango?
this is for a 2002 doge durango, it must be the sameLOCK CYLINDERREMOVALThe ignition key must be in the key cylinder for cylinder removal.# Disconnect negative cable from battery. # Remove upper and lower covers (shrouds) from steering column. # Place shifter in PARK position.# A retaining pin (Fig. 9) is located at side of key cylinder assembly. # Rotate key to RUN position. # Press in on retaining pin while pulling key cylinder from ignition switch.INSTALLATIONThe ignition key must be in the key cylinder for cylinder installation.# Install the key cylinder into the housing using care to align the end of the key cylinder with the ignition switch. # Push the key cylinder in until it clicks. # Replace the upper and lower shrouds. # Reconnect the battery.
What is another shape for cylinder?
A cylinder is a cylinder. Another shape is not a cylinder.A cylinder is a cylinder. Another shape is not a cylinder.A cylinder is a cylinder. Another shape is not a cylinder.A cylinder is a cylinder. Another shape is not a cylinder.
How do you replace the ignition switch on a solara?
Disconnect the negative battery cable and remove the steering wheel. Turn off windshield wiper and disconnect the wiring. Insert the key into the cognition and turn the switch to a locked position. Depress the retaining pin and remove the cylinder. Enter the old cylinder into the new ignition.
What is the mathematical name for cylinder?
the answer is CYLINDER. der a cylinder is obviously called a cylinder
What do you call a long cylinder?
A cylinder? A cylinder is still a cylinder regardless of how long it is.
How do you replace the master cylinder on a 1990 Honda CRX?
Hello,Here is a simple walk-through on replacing the master cylinder on a '90 CRX:Disconnect the negative battery cable and disable the SRS system (if equipped.) At the top of the clutch pedal, remove the cotter pin and pull the pedal pin out of the yoke.Remove the nuts and bolts holding the clutch master cylinder and remove the cylinder from the engine compartment.Disconnect and plug the hydraulic lines from the master cylinder.Installation is the reverse of the removal procedure. Bleed the clutch hydraulic system.
What cylinder goes on a 1989 cutlass sierra?
What cylinder? Master (brake) cylinder? Rear Brake cylinder? Lock cylinder?
