0
The sliding scale wage is a legal way for employers to screw their employee's should be illegal. The way it works is to not only take away your over time or time and a half but it also makes you make less per hour after you get to your 40 hour work week. In other words a after a normal 40 hours of work you should get time and a half for your effort, but with sliding scale you make less per hour than your regular pay and it continues to drop every ten hours over 40. For example if you make 20 dollars per hour you should keep that amount until 40 hours. After the 40 hours and up to 50 you might make 13 dollars an hour. After that up to 60 hours you might make 7 dollars an hour and so on. That's right ,take it from someone who lives in Louisiana and is on this very pay scale.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is sliding wage scale?
It increases the wages as the prices increase. This is so the worker is paid equally to the rise in inflation.
How much does a trugreen route manager make?
You are either paid hourly, or sliding scale, which is salary but not really. The average wage per year is 25,000
Is a blood glucose sliding scale a ratio-scale measurement?
no
What is a rolling off-set?
a sliding scale
Where in Seattle can I get grief counseling on a sliding scale fee?
You can try contacting Low Fee Counseling Services at Seattle University or the Seattle Counseling Service which offers sliding scale fees for grief counseling. Additionally, you can check with community health centers like Neighborcare Health or mental health organizations for more resources.
What does the term 'pay scale' mean?
The term "pay scale" is a noun that refers to the hierarchy of wage level, typically varying according to job title, salary or length of service. It is also called a "salary scale" or "wage scale".
Where are some residential treatment centers that are open to the public and charged on a sliding scale?
MONDANARO-BASKIN CENTER at 516 Chestnut St. Santa Cruz, CA 95060 offers a sliding scale. Call them at (831) 423-9015
What is the wage scale for a union pipe fitter in Indiana?
32HR
What is working for scale mean in the film industry?
The minimum union wage.
How do you use the vernier calipers?
Instructions on useThe Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm.Close the jaws lightly on the object to be measured.If you are measuring something with a round cross section, make sure that the axis of the object is perpendicular to the caliper. This is necessary to ensure that you are measuring the full diameter and not merely a chord.Ignore the top scale, which is calibrated in inches.Use the bottom scale, which is in metric units.Notice that there is a fixed scale and a sliding scale.The boldface numbers on the fixed scale are centimeters.The tick marks on the fixed scale between the boldface numbers are millimeters.There are ten tick marks on the sliding scale. The left-most tick mark on the sliding scale will let you read from the fixed scale the number of whole millimeters that the jaws are opened.In the example above, the leftmost tick mark on the sliding scale is between 21 mm and 22 mm, so the number of whole millimeters is 21.Next we find the tenths of millimeters. Notice that the ten tick marks on the sliding scale are the same width as nine ticks marks on the fixed scale. This means that at most one of the tick marks on the sliding scale will align with a tick mark on the fixed scale; the others will miss.The number of the aligned tick mark on the sliding scale tells you the number of tenths of millimeters. In the example above, the 3rd tick mark on the sliding scale is in coincidence with the one above it, so the caliper reading is (21.30 ± 0.05) mm.If two adjacent tick marks on the sliding scale look equally aligned with their counterparts on the fixed scale, then the reading is half way between the two marks. In the example above, if the 3rd and 4th tick marks on the sliding scale looked to be equally aligned, then the reading would be (21.35 ± 0.05) mm.On those rare occasions when the reading just happens to be a "nice" number like 2 cm, don't forget to include the zero decimal places showing the precision of the measurement and the reading error. So not 2 cm, but rather (2.000 ± 0.005) cm or (20.00 ± 0.05) mm.thank you from assven q
How do you use vernier?
Instructions on useThe Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm.Close the jaws lightly on the object to be measured.If you are measuring something with a round cross section, make sure that the axis of the object is perpendicular to the caliper. This is necessary to ensure that you are measuring the full diameter and not merely a chord.Ignore the top scale, which is calibrated in inches.Use the bottom scale, which is in metric units.Notice that there is a fixed scale and a sliding scale.The boldface numbers on the fixed scale are centimeters.The tick marks on the fixed scale between the boldface numbers are millimeters.There are ten tick marks on the sliding scale. The left-most tick mark on the sliding scale will let you read from the fixed scale the number of whole millimeters that the jaws are opened.In the example above, the leftmost tick mark on the sliding scale is between 21 mm and 22 mm, so the number of whole millimeters is 21.Next we find the tenths of millimeters. Notice that the ten tick marks on the sliding scale are the same width as nine ticks marks on the fixed scale. This means that at most one of the tick marks on the sliding scale will align with a tick mark on the fixed scale; the others will miss.The number of the aligned tick mark on the sliding scale tells you the number of tenths of millimeters. In the example above, the 3rd tick mark on the sliding scale is in coincidence with the one above it, so the caliper reading is (21.30 ± 0.05) mm.If two adjacent tick marks on the sliding scale look equally aligned with their counterparts on the fixed scale, then the reading is half way between the two marks. In the example above, if the 3rd and 4th tick marks on the sliding scale looked to be equally aligned, then the reading would be (21.35 ± 0.05) mm.On those rare occasions when the reading just happens to be a "nice" number like 2 cm, don't forget to include the zero decimal places showing the precision of the measurement and the reading error. So not 2 cm, but rather (2.000 ± 0.005) cm or (20.00 ± 0.05) mm.thank you from assven q
How do you use vernier caliper?
Instructions on useThe Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm.Close the jaws lightly on the object to be measured.If you are measuring something with a round cross section, make sure that the axis of the object is perpendicular to the caliper. This is necessary to ensure that you are measuring the full diameter and not merely a chord.Ignore the top scale, which is calibrated in inches.Use the bottom scale, which is in metric units.Notice that there is a fixed scale and a sliding scale.The boldface numbers on the fixed scale are centimeters.The tick marks on the fixed scale between the boldface numbers are millimeters.There are ten tick marks on the sliding scale. The left-most tick mark on the sliding scale will let you read from the fixed scale the number of whole millimeters that the jaws are opened.In the example above, the leftmost tick mark on the sliding scale is between 21 mm and 22 mm, so the number of whole millimeters is 21.Next we find the tenths of millimeters. Notice that the ten tick marks on the sliding scale are the same width as nine ticks marks on the fixed scale. This means that at most one of the tick marks on the sliding scale will align with a tick mark on the fixed scale; the others will miss.The number of the aligned tick mark on the sliding scale tells you the number of tenths of millimeters. In the example above, the 3rd tick mark on the sliding scale is in coincidence with the one above it, so the caliper reading is (21.30 ± 0.05) mm.If two adjacent tick marks on the sliding scale look equally aligned with their counterparts on the fixed scale, then the reading is half way between the two marks. In the example above, if the 3rd and 4th tick marks on the sliding scale looked to be equally aligned, then the reading would be (21.35 ± 0.05) mm.On those rare occasions when the reading just happens to be a "nice" number like 2 cm, don't forget to include the zero decimal places showing the precision of the measurement and the reading error. So not 2 cm, but rather (2.000 ± 0.005) cm or (20.00 ± 0.05) mm.thank you from assven q
