people
You could use a measuring cup or a liquid measuring jug to find out the volume of liquid a jar can hold. Fill up the jar with water, then pour the water into the measuring cup to determine the volume.
You can determine if two cups hold the same amount of water by filling them to the same level and measuring the volume of water in each using a measuring cup or a volume measurement tool. The weight of the cups themselves will not affect the amount of water they can hold.
Get a measuring jug that will hold the marbles easily. Half fill the measuring jug with water. Note the volume reading on the measuring Jug scale (measurement A). Add the marbles. Note the new water level reading on the measuring jug scale (measurement B).Subtract measurement A from measurement B, the answer is the volume of the marbles.
Use water displacement. Measure water before you put the rock in it, and then again afterwards. Put a measuring cup large enough to hold the rock in a pot large enough to hold the measuring cup and fill the measuring cup to the very top with water. Lower the rock into the measuring cup carefully so that the water flows over and into the pot. Carefully remove the measuring cup with the rock without spilling any additional water into the pot. When you measure the water in the pot it will equal to the volume of the rock (accuracy will depend on how careful you were). This is displacement measuring.
The weight of a pail of water will depend on the volume of water it can hold. On average, water weighs about 8.34 pounds per gallon, so you can calculate the weight of the water by measuring the volume of water in the pail and multiplying it by the weight per gallon.
To measure the volume of rock, you can use the water displacement method. Simply fill a container with a known volume of water, then submerge the rock in the water and measure the change in water level. The increase in water level corresponds to the volume of the rock.
it is easiest to do with small rocks, but can be dome with anything if you can move it and have a container large enough to hold it. place water into a container with measurment markings and place the rock into it. the amount the water level rises, called displacement, is the volume of the rock.
The formula is: [ Volume = 0 ].A 'plane figure' has no volume. That's any figure that you can draw on paper,and those can't hold water. It takes volume to hold water, and volume takesthree dimensions.
Yes, holding a graduated cylinder is a good laboratory practice when measuring volume. It helps to ensure accurate measurements by providing a stable and controlled grip on the cylinder, preventing any accidental spills or errors in volume readings. Additionally, it promotes safety by reducing the risk of breakage or splashing of the liquid.
beacause the water can hold it
A shape that holds 58cm3 of water could be a cube with sides measuring approximately 3.8cm each. This is calculated by taking the cube root of 58cm3, which is approximately 3.8. Therefore, a cube with sides of 3.8cm each would have a volume of 58cm3, allowing it to hold that amount of water.
The amount of water a pot can hold depends on its size or capacity. Pots come in various sizes, ranging from a few cups to several gallons. Check the volume measurements provided by the manufacturer or use a measuring cup to determine the capacity of your pot.