0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where can I find the relay box for a 2001 Jetta 2.0?
Most of the relays are on a panel underneath the steering column. You first remove the trim panel that has a few torx screws, and it's right there.
Is there any way you can take the dash off of a 1995 Buick Lesabre by yourself?
It is very complicated and necessary to have a manual telling you how it's done. I would take it to an auto trim shop. First, you'll need to remove the wood trim from the dash. It is held in by a series of clips, so it's just a matter of carefully popping the trim out. Once the wood trim pieces are removed, next you'll remove the vents from the black trim of the dash. Turn them all the way to one side and pull as best as you can. They will pop out (although you might need a screwdriver to wedge in behind if they don't come right out). Removing the wood trim and vents will reveal approximately 10 (don't recall the exact #) torx head screws. Remove those, and then you can remove the black dash panel (you might need to shift the car into neutral to get the panel out).
What is the size torx head to remove the rear brake on your 02 Silverado?
t45
What size torx bit do you use to remove oil drain plug on 03 Saturn Vue?
It uses a T45 Torx bit.
What size torx bit do you need for the oil sump plug on a holden vectra?
T45
What size torx bolts are used on 1993 Buick roadmaster Wagon alternator mounting bracket?
They are either T40 or T45?
What is the head of a 2000 vauxhall vectra engine drain bolt?
hi the size you need is a T45 . i thing the T stands for torx
What tool do you need for the oil pan bolt on a 2001 Cadillac Catera?
if you are talking about the oil drain plug it's called a "torx" bit size t45
What is the torque spec a 1997 Saturn valve cover?
SOHC motor (T45 torx bit) 89 in-lbs DOHC motor (10mm bolts) 22 FT-lbs
What is the torque specs a 1993 Saturn valve cover?
SOHC motor (T45 torx bit) 89 in-lbs DOHC motor (10mm bolts) 22 FT-lbs
Does 84 corvette top come off?
yes the are 4 torx screws in each corner the tool kit should be behind the seats in one of the compartments a small ratchet with a extende3d length torx bit sorry i dont remember the bit size maybe t45
What size torx bit is needed to remove 2000 grand Cherokee Laredo front brake caliper bolt?
I also have a 2000 grand Cherokee Laredo. Just changed front pads, and it is a torx bit T45. I couldn't find this answer on the web, so I bought several sizes to find out.
What tools do you need to remove the oil pan drain plug on a 1998 Cadillac Catera?
The correct torx bit would be a T45. When replacing the drain plug, wipe the pan surface first, then install with a new gasket. a ratchet and the right sized socket
How do you remove the front brake pads on a 2002 ford expedition - do I need a special tool?
You will need an 18mm socket and T45 torx (star) socket also. These will be used to remove the caliper from the rotor. The caliper has 2 parts that use a rail to align themselves and the brakepads.
