0

# What is an inclined plane give 5 example?

Updated: 9/24/2023

Wiki User

10y ago

5 examples of an inclined plane are: a slide, a ramp, a ski jump, sloping roads and chisels.

Wiki User

10y ago

Earn +20 pts
Q: What is an inclined plane give 5 example?
Submit
Still have questions?
Related questions

### What simple machines are in the lever family?

pulley inclined plane wedge 5/5

### What are 5 examples of an inclined plane in use?

stairs,ramp,slide

### How do you derive the formula for number of images formed by two plane mirrors inclined at an angle?

(360/Angle)-1 example: angle= 60 then, (360/60)-1=5

### What are the six names of simple machines?

A screwdriver is an example of a wheel and axle. An axe is an example of a wedge. Scissors are an example of a lever. A ramp is an example of an inclined plane. A faucet is an example of a screw. A flag pole is an example of a pulley.

### What is the mechanical advantage of an inclined plane that is 5 m high and 20 m long?

5/20 = 1/4 or 0.25

wedge

1/5 = 0.2

### How is the moons orbit positioned relative to the eclptic?

The Moon's orbit is inclined by just over 5 degrees to ecliptic plane.

1/5

### A car is driven up a hill at a constant speed Discuss all the forces acting on the car What pushes it up in the hill?

The forces acting on the car include: 1) Weight (mass x gravity) of the car. 2) Normal force between the inclined plane at each tire (perpendicular to the inclined plane). 3) Force of static (rolling) friction acting between the tires and the inclined plane (parallel to the plane and acting against the direction of rotation of the tires). 4) Force exerted by the car on the plane (parallel and opposing friction on the inclined plane). 5) Drag force depending on air resistance and velocity of the car. The car is allowed to climb the hill because of the static friction opposing the force it is exerting. Without this friction, it would not be able to climb the hill.

### What's an inclined plane?

An inclined plane is a simple machine, consisting of a sloping surface, whose purpose is to reduce the force that must be "directly" applied to raise a load. Note that the force required is not reduced, but is "spread out" to allow the application of less force over a longer period.To raise a body vertically a force must be applied that is equal to the weight of the body, i.e., the product of its mass and the acceleration of gravity. The amount of work done (i.e., energy expended) in raising the body is equal to its weight times the distance through which it is raised. By means of an inclined plane a force smaller than the weight of the body can be exerted over a distance greater than the direct vertical distance, doing work equal to the product of the force and the distance through which it acts. If friction is ignored, the work done using the inclined plane will be exactly equal to the work done in lifting the body directly. In any real system some work is done to overcome friction between the plane and the load.The actual mechanical advantage of an inclined plane is the ratio of the load lifted to the force applied; ideally it is equal to the ratio of the length of the sloping plane to its vertical rise. An inclined plane whose sloping length is 5 m and whose vertical rise is 1 m has a mechanical advantage of 5; a 300-newton load can be moved up such a plane by a 60-newton force.The inclined plane has been modified in many ways. The screw is an application of the principle of the inclined plane, but does not require that the load be moved vertically for its successful operation. Switchbacks on mountain roads are inclined planes that reduce the effort an automobile engine must exert, though it increases the distance a car must travel to ascend the mountain.a ramp that makes the force of pulling up somthing way easier?