Want this question answered?
Depends on the diameter of the pipe and the speed at which the water travels through it.
Three-quarter inch diameter pipe refers to the outside diameter. Different pipe types of the same outside diameter usually have different inside diameters. ASTM SCH 40 pipe of 3/4 inch diameter has an inside diameter of 0.824 inches. ASTM CL 200 pipe of 3/4 inch diameter has an inside diameter of 0.930 inches because of the thinner wall.
150
That depends entirely on the viscosity of the liquid in the pipe ! Water would flow faster than oil !
Over 9,000.
If the flow velocity remains the same the flow volume will increase by the square of the diameter ratio.(2/1.25) = 1.6 = diameter ratio1.62 = 2.56 more flow volume through 2 inch pipe compared to 1.25 inch pipe.
what is the discharge flow of 10m/s passing from 2ft pipe
Assuming that the pressure remains at a constant, reducing the diameter of the pipe will increase the water flow. On the contrary, increasing the diameter would cause the water to flow at a much slower rate.
It takes 24.50985 feet of 1 inch pipe to hold one gallon of water. Jeff Payne jpayne@texwipe.com
Water flow rate half inch PVC pipe 65 psi?
A pipe. The volume of water available can be compared to voltage. The diameter of pipe could be compared to resistance with smaller diameter being larger resistance and the flow of water past a point in pipe is equivalent to current flow.
Depends on the internal diameter, and the flow velocity. Velocity of water = Delta V Internal Radius= R RxRxV= Volume
The volume of water in a 4-inch diameter, 1-foot section of pipe is 0.6528 gallons of water.
The volume is 31.809 cubic feet.
100
Depends on the diameter of the pipe and the speed at which the water travels through it.
Three 0.50 inch diameter pipes will fit into one 1.50 inch diameter pipe (hypothetically). The 0.50 inch diameters stack on top of each other until you have 1.50 inches!