0
Drop panels are used to thicken the slab around the column in flat slabs to avoid punching shear. Since flat slabs have no stirrups shear is resisted by thickening the slab around the column to increase the concrete in shear.
Beams can also be used, but generally drop panels are preferred to avoid conflicts with the electromechanical works of the structure.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What would cause high voltage drop readings?
High resistance on the feeder to the load will cause voltage drop at the load end of the circuit. If this is happening, do the calculations for voltage drop, using the amperage of the load, voltage of the load, the size of the wire feeding the load and the distance from the distribution panel to the load.
Voltmeter in series circuits?
The only reason anyone will put a voltmeter in series is to measure current flow as a function of voltage drop.
Will a circuit breaker function the same if supply and loads are reversed?
Yes, a circuit breaker will function the same if supply and loads are reversed. This is the way that some sub panels are fed instead of a main disconnect at the top of the distribution panel.
What gage wire do you need to run for 200 amp sub panel 300 ft from electrical panel?
Using AWG # 3/0 copper wire you will have a voltage drop of around 3.8% at 68 degrees Fahrenheit. This should be acceptable to your local inspector but you may want to call them and make sure.
What size wire to run 400 ft from main panel need 60 amps?
Use AWG # 4 copper and you will have a 2.6% voltage drop which is acceptible.
What is the function of panel?
What is
What is the function of panel in gymnastic?
Scoring the skill
What is medical code 80076?
Hepatic function panel
What color tube for renal function panel?
Sst
What is an service panel?
The place where the power drop from the electric company enters your house. The service panel is where the fuses or breaker switches are.
On a 2000 Ford Focus LX is there an access panel to replace the fuel pump or do you have to drop the gas tank?
Drop the tank.
How do you change the fuel pump on a 95 dodge spirit does it have an acess panel or do you have to drop the tank?
Definitely have to drop the tank. Sorry.
Is there an access panel to the fuel pump on a 1996 blazer or do you have to drop the tank?
unless you pull up the carpet and see an access panel wich i don't remember one being on there...you'll have to drop the tank. sorry!
Does a 2003 Buick lasabre have access panel for fuel pump?
No, drop tank
Is there a access panel for fuel pump on 86 tbird?
No , U have to drop the tank , after I dropped mine , i cut a access panel for future repairs
Is there an access panel to fuel pump 91 Oldsmobile?
No, you must drop the fuel tank.
Where is fuse for BMW 325xi windshield washers?
check your glovebow drop down panel.
