0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Is 43 Mpa stronger than 60 Mpa?
No. It is 17 Mpa LESS strong 60 Mpa = 60 N/mm2
1 Mpa equals to how many Kg per square cm?
1 MPa = 10 kg/cm2 (MPa is pressure, kg/cm2 is mass/area not actual pressure)
WhAt is the value of 3000psi in Mpa?
3000psi = 20.67MPa
What are the units of MPa?
Mega Pascal - measurement of pressure
HOW much is 1 mega pascal in kg?
1 MPa = 1000000 N/m2 and 1 N = 1 kg*m/s2
What is meant by tensile strength in of api grade x-70 steel?
Tensile Strength is 570 MPa (i.e. 82.7 ksi) - (Ref. API 5L - Specification for line pipe - Forty Forth Edition Section 9.3.2- Table 6)
What are difference between Grade 60 and 60 Mpa?
Grade 60 refers to the marks attained in a given single test. 60 MPA refers to the cumulative average of a given course.
Which grade of concrete is used in pre-tensioned prestressed concrete structure?
42 mpa for pre tension and 35 mpa for post tensioned
What is the breaking strength of A mortar at 7 days?
33 Mpa...for 43 grade cement
What is 10.9 grade steel?
10.9 IS PROPERTY CLASS DESIGNATION.MATERIAL IS MEDIUM CARBON ALLOY STEEL, QUENCHED AND TEMPERED. PROOF LOAD STRESS -830 MPa TENSILE YIELD STRENGTH -940 MPa TENSILE ULITIMATE STRENGTH-1040 MPa
Can metric grade 12.9 be worst than 10.9. i.e. more brittle?
The "metric grade" your asking about conforms to North American metric standards. The 12.9 should have a ultimate tensile strength of 1200 MPa and tensile yield strength of 1080 MPa. The 10.9 should be weaker have a ultimate tensile strength of 1000 MPa and tensile yield strength of 900 MPa. You are asking "can" it be more brittle. It should not be but it can be if a problem with manufacturer quality control.
43 grade opc vs 53 grade opc?
The grade in cement mainly defile the average compressive strength after 28 days in mega pascals (Mpa) of at least three mortar cubes (area of face 50 cm squared) composed of one part cement, 3 parts of standard s and (conforming to IS 650:1966) by mass and P/4 (P is the percentage of water required to produce a paste of standard consistency as per IS standard) + 3 percentage (of combined mass of cement plus sand) of water, prepared, stored and tested in the manner described in methods of physical test for hydraulic cement. 721 hr not < 23 MPa for 43 grade, 27 MPa for 53 grade 1682 hrs not <33MPa for 43 grade, 37MPa for 53 grade 6724 hrs not <43MPa for 43 grade, 53 MPa for 53 grade
A procedure for mixing 25MPa concrete with a small 180l concrete mixer without additives?
Proportions for different grades: Cement : Sand : Gravel 1 : 2 : 5 for grade C15(general purpose concrete) 15 mpa 1 : 2 : 4 for grade C25(strong) 25 mpa 1 : 2 : 3 for grade C30(very strong) 30 mpa Remember the proportion is done in terms of volume. This means the above proportions are correct if using the same measure.
What is the maximum psi for titanium without breaking?
Commercial grade Titanium (92% pure) is 63,000 psi (434 MPa). Certain titanium alloys (e.g., Beta C) achieve tensile strengths of over 200,000 psi (1,400 MPa). Megapascal or MPa is a unit to measure tensile strength.
What is grade S355?
EN10025 S355J2+N structural steel has the higher Tensile of 510 MPa to 680 MPa and a Yield of 355 MPa, depending upon the structural steel thickness. ensteelstandardcom/FAQ/en10025-s355j2+n-structural-steel-plate-supplier.html
What is pn 16 in a valve?
Will the valve DN, PN, respectively, what does this mean? PN name (pressure nominal) on behalf of Nominal pressure Units are MPa MPa For example, is J41H-16C Nominal pressure 16Kgf/cm2 Per square centimeter pressure value MPa 16Kg count if the case is PN1.6MPa The representative of the internal pipe diameter DN Units are mm mm DN50 example is the 50 mm
What is full form of Mpa?
mpa
