They are: 1 square meter = 1*1 = 12 meters and 1 cube meter = 1*1*1 = 13 meters
1 square metre = 10.7639104 square foot
A cube has 6 sides,therefore a cube with a volume of 1 cubic metre has 6*1=6m2
Area can only be measured in square metres, it cannot be measured in metres cubed. Conversely, cubic metres can only be used for volume, not area.
A square has an area not a volume. Here are some equations for a cube and a square area of a square = length² volume of a cube = length³ Remember that units are very important.
Flux is the number of lines or particle passing per unit area. The unit of area is meter square.
18m2
1 square metre = 10.7639104 square foot
A cube has 6 sides,therefore a cube with a volume of 1 cubic metre has 6*1=6m2
newton meter square is not the unit of volume so cant be converted in cm3
Downtown, next to the Joulery store on Second Square, across from the statue of the meter cube.
Area can only be measured in square metres, it cannot be measured in metres cubed. Conversely, cubic metres can only be used for volume, not area.
A square has an area not a volume. Here are some equations for a cube and a square area of a square = length² volume of a cube = length³ Remember that units are very important.
Flux is the number of lines or particle passing per unit area. The unit of area is meter square.
To calculate the price per square meter, divide the total price by the total number of square meters. For example, if a piece of cardboard with an area of 10 square meters cost 5 dollars, the price per square meter would be (10 m2)/($5), which comes out to be 50 cents per square meter.
9 aboveXP...
Pressure on the table = cube's weight / area of contactCube's weight = M G = (35) (9.8) = 343 newtonsArea of contact = area of one face of the cube = (1.5m) squared = 2.25 square meterPressure = 343/2.25 = 152 and 4/9 newton per square meter = 152 and 4/9 PascalThe idea is to:a) Calculate the weight of the 35 kg cube (multiply mass x gravity - gravity is approximately 9.8 newton/kilogram). The weight will be in newton.b) Calculate the surface area of the block (the bottom square, where it is in contact with the table).c) Divide the result of (a) by the result of (b). The answer will be in newton per square meter, also known as pascal.
Conversion: cm2 x 0.0001 = square meters