0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you find cylinder ID when the OD is known?
There is no corelation between a cylinders ID to OD.
What is the make up torque HT55 375 drill pipe?
it will vary by Tool Joint OD and ID. FYI 7"OD x ID 4" HT55 is 52,600 Ft lbs
How do I Find wall thickness of tube?
wall thickness of pipe is (OD - ID) /2
Why pipe NB is different with OD up to 12 inches?
Based on the NPS and schedule of a pipe, the pipe outside diameter (OD) and wall thickness can be obtained from reference tables such as those below, which are based on ASME standards B36.10M and B36.19M. For example, NPS 14 Sch 40 has an OD of 14 inches and a wall thickness of 0.437 inches. However the NPS and OD values are not always equal, which can create confusion.For NPS â…› to 12 inches, the NPS and OD values are different. For example, the OD of an NPS 12 pipe is actually 12.75 inches. To find the actual OD for each NPS value, refer to the tables below. (Note that for tubing, the size is always the actual OD.)For NPS 14 inches and up, the NPS and OD values are equal. In other words, an NPS 14 pipe is actually 14 inches OD.The reason for the discrepancy for NPS â…› to 12 inches is that these NPS values were originally set to give the same insidediameter (ID) based on wall thicknesses standard at the time. However, as the set of available wall thicknesses evolved, the ID changed and NPS became only indirectly related to ID and OD.For a given NPS, the OD stays fixed and the wall thickness increases with schedule. For a given schedule, the OD increases with NPS while the wall thickness stays constant or increases. Using equations and rules in ASME B31.3 Process Piping, it can be shown that pressure rating decreases with increasing NPS and constant schedule.[note 1]
What is the diameter of an 8 inch pipe?
The inside diameter (ID) is 8 inches. The nominal pipe size (NPS) and outside diameter (OD) depend on the thickness of the walls of the pipe.
How do you find the bearing number of a ball bearing?
The bearing number can be checked out depends on the size of ID (Inner Diameter), OD (Outer Diameter) and H (Height) of this bearing.
How do you find cylinder ID when the OD is known?
There is no corelation between a cylinders ID to OD.
What is Id versus od size in copper fittings?
id means inside diameter, od means outside diameter, copper pipe and tubing is measured by the od, therefore the od the pipe or tubing will be the same as the id of the fitting
How can you get the weight for steel pipe?
assuming it's hollow. 10.68*ID*(OD-ID)
How can you calculate the ID of a pipe?
Can you calculate the ID of a pipe when you have the OD to be 10.75" and the wall thickness to be 0.5"Depends on what you know about it. If you have the outer diameter and you know the wall thickness, then ID = OD-2 x wall thickness
BEARING ID 42MM, OD 75.8MM AND THICKNESS 39MM. WHICH BEARING I CAN USE THIS BEARING WILL BE USING FOR FAN PULLEY?
Here is a website that lets you put in the specifications of the bearign that you need and it will show you which to buy. from what I can tell, you will need one exactly like what you took out with the exact measurments. http://www.thefind.com/sports/browse-42mm-metric-ball-bearings
What is the make up torque HT55 375 drill pipe?
it will vary by Tool Joint OD and ID. FYI 7"OD x ID 4" HT55 is 52,600 Ft lbs
What are 2 producers?
the two producer of safty laboratory id odich[od
How od id kesha?
Kesha turned 23 on March 1, 2010,
Is their any general formula to calculate bearing OD?
No there is no proper formula for knowing the outer diameter
What does the abbreviation OD mean?
it means outside diameter as opposed to id which is internal diameter
How do I Find wall thickness of tube?
wall thickness of pipe is (OD - ID) /2
