0
What else can I help you with?
Determine and draw the equivalent resistances when 1 ohm in parallel with 2 ohm?
The equivalent resistance of the parallel combination is 2/3 ohm.
How many mega ohms in an ohm?
A megohm is 1000 kilohms. So 295k is 0.295M
If a 15-ohm resistor is connected in parallel with a 30 ohm-resistor the equivalent resistance is?
Rt = 10
Why watt density too high mega ohm is low?
ohm's measure resistance, the more ohm's the more resistance the less voltage
What is definition of one ohm?
One ohm is the SI unit of electrical resistance, representing the resistance of a conductor in which a current of one ampere is produced by a potential difference of one volt. It is named after the German physicist Georg Simon Ohm.
How do you ohm out a motor?
To ohm out a motor one would use an ohm meter. If one does not own or can not obtain a meter, the motor can be taken to a shop and ohmed out there for a fee.
How the declair one ohm resistance?
One ohm is the resistance through which a current of one ampere will induce an electrical potential difference of one volt. Ohm's Law: Resistance is Voltage divided by Current
What combination of units is equivalent to the amperes?
The unit of measure for voltage is volt. Ohm measures resistance.
What is the equivalent resistance when R1 equals 1 ohm and R2 equals 3 ohm whose total resistance equals R1 R2?
The equivalent resistance in a parallel circuit is given by the formula: 1/Rt = 1/R1 + 1/R2. Plugging in the given values (R1 = 1 ohm, R2 = 3 ohm), we get 1/Rt = 1/1 + 1/3 = 4/3. Therefore, the total resistance (Rt) is 3/4 ohm or 0.75 ohm.
Is 2.2k ohm resistor and 220 ohm resistor the same resistance?
No, a 2.2k ohm resistor and a 220 ohm resistor are not the same resistance. The "k" in 2.2k ohm stands for "kilo," which represents a multiplier of 1000. Therefore, a 2.2k ohm resistor is equivalent to 2200 ohms, while a 220 ohm resistor is simply 220 ohms. The difference in resistance values is a factor of 10 due to the kilo prefix.
Q: A 75 ohm light and a 150 ohm heater are connected in parallel to a 150 volt power source what is the equivalent resistance of the lamp and the heater?
50
Can you connect a 8 ohm speaker for a amp designed for a 4 ohm load?
You can, but the available power will only be about half of rated, and the frequency response will be slightly different. Better would be to connect two 8 ohm speakers in parallel, making an equivalent 4 ohm speaker.
