the bottom of the outer
A shield cone.
A Bunsen burner flame consists of an inner cone and an inner cone. In the inner cone, no combustion is occurring and the inner cone consists of a mix of air (which has been introduced through the vents in the bottom of the barrel) and gas. In the outer cone, combustion is occurring. Hence a Bunsen burner flame is "hollow;" there is no flame in the inner cone. Because air, containing oxygen, is present in the inner cone, it is called the "oxidizing zone." A piece of red hot copper held inside the inner cone will oxidize, being covered with a layer of black copper oxide.
What are the two regions in a Bunsen burner? The two regions in a Bunsen burner flame are: 1.An outer transparent, dim blue cone. 2.An inner,less transparent, brighter greenish-blue cone. This relatively non luminous,cone shaped flame is a combustion of carbon-hydrogen fuel which is used in a Bunsen burner to provide heat for laboratory purposes.
The outer oxidizing zone of a flame is the layer which gets into direct contact with oxygen. Lesser oxygen produces a yellow flame, but more oxygen supply produces a blue flame.
the bottom of the outer
1 verticie oxygen oxygen
There is no specific term for the outer layer of a volcano.
the mantle
Of a Bunsen Burner flame? Combustion takes place in all parts of the flame.
2, the inner most cone and the outer.
the outer hull generally
The Answers community requires more information for this question. Please edit your question to include more context. Core of WHAT?
Different levels of combustion are occurring within the two regions of the flame called the inner cone and outer cone. The inner cone tends to be a reducing atmosphere because there is a greater concentration of hydrocarbons within that region. It is also the hottest part because the most intense combustion is occurring there where O2 is mixed with the gas, CH4(methane). The outer cone is cooler but still quite hot. There are incomplete combustion productslike CO (and other less common products) in this region of the flame. The overview in the link will give you some more information. Hope this helps.
#1 there will only be 2 visible flames, the inner cone and the outer envelope. #2 the flame will be soft (quiet) #3 the inner cone will be well defined and fat.
A shield cone.
A cone bearer is a cone that bears