The operator of the equipment uses his judgment to determine whether or not the equipment is functioning automatically as needed. In case its not, a switch allows control of some aspect of the operation to be changed or improved in a way the equipment can't do by itself.
You may look up "override" in a dictionary.
No a switch just opens and closes a circuit. A switch can be replaced by a dimmer switch. The dimmer switch will fit in the same enclosure that the switch is removed from.
You can if you have a neutral wire present. If the existing switch is what is called a "switch loop" then you can not change the existing switch to a switched outlet. You can identify a switch loop by looking at the wires coming into the switch bow. If there are only one set of wires usually a black and white and they go directly to the switch then you have a switch loop
---o-----o----- is a closed switch / / ---------o o------ is an open switch
An EXO switch stands for EXternally Operated disconnect switch.
a switch
What happens if you override the cranes luff up limit switch
You will need to unplug the connector on the hood switch. That is how you can override on an Acura Vigor.
To override a neutral safety switch, locate it (it should be at the base of the steering column) and remove the green and brown wire. Connecting these two wires together will bypass the safety switch and your reverse lights will turn on.
You do not ,you replace it .
tis on the end of your shift nob
There should be an override switch inside the garage.
There is no such part on a Chrysler Sebring.
The safety override switch is probably on. If not, then the motor or switch may be bad.
There should be an asjustment beside the headlght switch.
On the CR-V 2000 it is in under the middle compartment
Not sure what you are referring to. Need more info.
Then you may ignore that instruction. Something about an ignition? Sounds familiar...