answersLogoWhite

0


Best Answer

12 amp is stronger than 9 amp by 12/9

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is stronger 9 amp or 12 amps?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Natural Sciences

What wire gauge should be used for 9 amp maximum?

#14 copper wire is rated for 15 amps.


What has more power a 5 amp grass trimmer or a 18 volt one?

At a specific voltage the higher the amperage the higher the rated horsepower of the motor. You will see the amperage rating used when manufactures sell hand tools. A saw that draws 12 amps, it is stated, is better than the saw that draws 9 amps. As the question stands a comparison can not be made between voltage and amps.


How many 9 watt bulbs can an 14 amperes 12 volt battery support?

Batteries are normally specified in ampere hours. A 12 v battery could be specified as 14 A-h or 14 ampere-hours, which means 14 amps for 1 hour, or 1.4 amps for 10 hours. In other words it produces less current for a longer time. A 9 watt bulb takes ¾ amp in theory, so it should last 14/¾ hours on that battery, that is 14 x 4 / 3 hours, 18 hours. Or two of the same bulbs for 9 hours, etc.


Can you use a standard outlet for a sauna that requires 120v2035w20A?

A standard home outlet in North America is 15 amps protecting a #14 copper conductor. The circuit should only be loaded to 80% of the circuits capacity. Watts = Amps x Volts = 15 x 120 = 1800. 1800 x .80 = 1440. As you can see a standard outlet does not meet the requirements, with or without the de-rate factor, that the sauna manufacturer recommends. The amperage that the sauna needs is, Amps = Watts/Volts. Amps = 2035/120 = 16.9 or (17 amps). The circuit for the sauna would require a single pole 20 amp breaker feeding a #12 copper conductor which is rated for 20 amps. The amperage rating of the sauna is just over the 80% by .9 of an amp. This amperage is close enough that it would be passed by an electrical inspector if this project were to be inspected.


What size ciruit breaker needed to run a 110v heater 500 watts?

That will draw about 9 amps at 120V. A 15 amp breaker if the circuit conductor is #14 or 20 amp breaker if the circuit conductor is #12. As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed. Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.

Related questions

What is stronger a 1 amp battery charger or a 9v battery?

You cannot compare these two totally different things. As far as amperage the charger puts out more amps if it is an auto battery charger and also puts out 12 volts. If you are talking about a 9 volt battery charger then the battery may or may not be more powerful, it depends on how many mii-amps the charger is putting out.


What wire gauge should be used for 9 amp maximum?

#14 copper wire is rated for 15 amps.


How long does it take 9 coulombs to pass a current of 3 amps?

1 Amp = 1 Coulomb/sec 3 Amps = 3 Coulomb/sec Time = (9 coul) / (3 coul/sec) = 3 seconds


Is 9 amp drill as powerful as 14 volt?

Your question is similar to: "Is an apple more powerful than an orange?" You are comparing two different parameters. Electric Power = Volts multiplied by Amperes = Volt-Amps. To know which drill is more powerful, you need to compare the Volt-Amps of each drill with the other one. If the battery voltage is the same for both drills (it probably is not), then the one with the highest motor current rating SHOULD be the most powerful. However, manufacturers tend to fudge some on their ratings. When they say "This is a 9 Amp drill", often it is not clear or not defined what they mean. Is the battery rated for a 9 Amp output, or is the motor rated to use 9 Amps maximum, or 9 Amps average, or are the wires running from the battery to the motor rated for 9 Amps? You see what I mean. Electric power cannot be measured in Amps or in Volts, but must be a combination of the two (Volt-Amps, or Watts, or Horsepower, or some known and well-defined power quantity).


What is a 15 amp electrical outlet?

A #14 copper wire rated at 15 amps is the minimum size wire for a 15 amp receptacle.


What has more power a 5 amp grass trimmer or a 18 volt one?

At a specific voltage the higher the amperage the higher the rated horsepower of the motor. You will see the amperage rating used when manufactures sell hand tools. A saw that draws 12 amps, it is stated, is better than the saw that draws 9 amps. As the question stands a comparison can not be made between voltage and amps.


You have Sam sung make 1.5 ton Ac Hown much amp should it require to run smoothly your AC indicates 12 amp consumption is it perfect or excess?

i have samsung 1.5 split sc...n it consume 9 to 10 amp...so i guess its normal 12 amp ...


How many 9 watt bulbs can an 14 amperes 12 volt battery support?

Batteries are normally specified in ampere hours. A 12 v battery could be specified as 14 A-h or 14 ampere-hours, which means 14 amps for 1 hour, or 1.4 amps for 10 hours. In other words it produces less current for a longer time. A 9 watt bulb takes ¾ amp in theory, so it should last 14/¾ hours on that battery, that is 14 x 4 / 3 hours, 18 hours. Or two of the same bulbs for 9 hours, etc.


Can you use a standard outlet for a sauna that requires 120v2035w20A?

A standard home outlet in North America is 15 amps protecting a #14 copper conductor. The circuit should only be loaded to 80% of the circuits capacity. Watts = Amps x Volts = 15 x 120 = 1800. 1800 x .80 = 1440. As you can see a standard outlet does not meet the requirements, with or without the de-rate factor, that the sauna manufacturer recommends. The amperage that the sauna needs is, Amps = Watts/Volts. Amps = 2035/120 = 16.9 or (17 amps). The circuit for the sauna would require a single pole 20 amp breaker feeding a #12 copper conductor which is rated for 20 amps. The amperage rating of the sauna is just over the 80% by .9 of an amp. This amperage is close enough that it would be passed by an electrical inspector if this project were to be inspected.


10 ohms plus 9 volts equals how many amps?

Ohm's Law: Voltage = Amperes times Resistance 9 volts = amps * 10 ohms amps = .9


What amp to set a tattoo power supply?

set your voltage first to around 4-6v for rotary 8-9 for regular guns and thenadjustthe amps until the gun sounds right.


How many amps are in a 9volt battery?

It varies from one 9 volt battery model to another. The typical Alkaline 9 volt battery you find in many toys and smoke detectors has 565 mAh (Milliampere Hours) of power. A Zinc Carbon model has 400 mAh. A Lithium has 1200 mAh. There are 1,000 mili amps in 1 amp.