0
What is the angular size of a circular object with 1 inch diameter viewed from 4 yards?
Wiki User
∙ 7y ago
The size is approx 0.0069 radians.
Wiki User
∙ 7y ago
To find the angular size, we need to convert the distance to the object into radians. 4 yards is approximately 12 feet or 144 inches. The angular size can be calculated as the diameter of the object (1 inch) divided by the distance to the object (144 inches), which equals approximately 0.0069 radians.
Add your answer:
Earn +20 pts
What is the angular size of a circular object with a 2 inch diameter viewed from a distance of 4 yards.?
It is 0.8 degrees.
What is the angular size of a circular object with a inch diameter viewed from a distance of 2 yards?
It is approx 0.8 degrees.
Can you figure height of a 3 d object if you only have depth and width?
No If you have a picture of it you can use the measurements you know to give you the scale of the picture. Or if you don't have a picture you can use the length of your thumb viewed at arms length, and then calibrate using a known object, or better still, the known width.
What is the surface area of the visible sides of a rectangular pyramid?
The number of visible sides if one if viewed from the front or side. The elevation from an angular position would give two face whereas all four triangular faces will be visible from above. So the answer will depend on the viewing position. In every case, the dimensions of the triangles would be required to find the visible surface area.
What does the top down view of a solid figure mean?
It is the two-dimensional image of the solid figure when it is viewed from points above the object. In mathematical terms (projective geometry), it is the projection of the figure onto a horizontal plane using the point at infinity as the centre of projection.
What is the angular size of circular object with a 2 inch diameter viewed from a distance of 4 yards?
It is 0.8 degrees.
What is the angular size of a circular object with a inch diameter viewed from a distance of 2 yards?
It is approx 0.8 degrees.
What is the angular size of a circular object with a 2 inch diameter viewed from a distance of 4 yards.?
It is 0.8 degrees.
What is the Angular size of a circular object with a 1 inch diameter viewed from a distance of 2 yards?
Since it is a small angle, just divide the diameter by the distance. Be sure to convert everything into the same units first. The answer will be in radians.
What is the angular size of a circular object with a 1 inch diameter viewed from 2 yards away?
Convert everything to the same units (I suggest inches), then divide the 1 inch by the equivalent of the 2 yards. That will give you the approximate angular size, in radians.This works because 1 inch is much smaller than 2 yards.
Why do you get circular fringes in fabry perot experiment?
In michelson interferometer the mirros are perpendicular and because of our eye viewed direction and angle theta the fringes are circular
Can living object be viewed with electron microscope?
No Way..!
How would you estimate the size of object viewed under high power objective lens 40 times if you were given the size of the field diameter when using low power objective lens 4 times?
the naswe is 400
What is object lens?
the lens or system of lenses in a telescope or microscope that is nearest the object being viewed
What object is too small to be viewed without a microscope?
phytoplankton
How are you going to determine the magnification of an object viewed under a microscope?
To determine the total magnification of an object being viewed under a microscope, multiply the magnification of the ocular lens by that of the objective lens.
What does a microscope do to an object?
Magnifies the object being observed through the microscope. The magnification of the lens being used will determine how closely the object can be viewed.
