Triangle area: bh/2
8x8/2=64/2=32(cm2)
5
If it's rectangular, you need to multiply length x width, to get the area. If the sides are expressed in cm, the area will be in square cm.
divide the parralelogram into three sections--a rectangle and two triangles and find the area of each (triangle is 1/2 base x height) (rectangle is length times width
Each face of a box is a rectangle . The area of a rectangle is (its length) times (its width). Measure the length and width of each face, and multiply (length times width). If you think about what you're doing, and plan it carefully, you only have to make three measurements and you'll have the whole box covered ... all six faces.
Formula for area of Triangle: a=0.5(bh) Where b is the base length and h is the height. For example, a triangle of base 10 and height 5 has an area of 25.
5
If it's rectangular, you need to multiply length x width, to get the area. If the sides are expressed in cm, the area will be in square cm.
divide the parralelogram into three sections--a rectangle and two triangles and find the area of each (triangle is 1/2 base x height) (rectangle is length times width
You must convert each measurement (length and width) from whatever unit of measurement you have used into feet; then multiply the length (in feet) times the width (in feet). The result will be the area in square feet.
Being a two dimensional shape, it does not have volume.It's area on the other hand, would be lw/2 or one half of it's length times it's width. In the case of a right triangle, the width and height will be the lengths of the two sides that are 90° to each other.
to find the area of any thing you have to multiply length by width depends unless its a triangle o parrallelogram then u have to multiply base by height divided by two
Measure length and width of each area that has been plastered or needs to be plastered. Multiply length times width for each area, then add the results.EXAMPLE:You have two areas, each with a length and width of ten feet.In A1, calculate area 1 [=10*10]In A2, calculate area 2 [=10*10]In A3, calculate total area [=A1+A2]
The perimeter is found by adding the length of each side. The area is found by multiplying the length of the square by the width.
Each face of a box is a rectangle . The area of a rectangle is (its length) times (its width). Measure the length and width of each face, and multiply (length times width). If you think about what you're doing, and plan it carefully, you only have to make three measurements and you'll have the whole box covered ... all six faces.
No. (a) it is perimeter, not perimeder (b) it is length, not lenght. Length times Width is area (for a rectangle). Perimeter is the sum of all the sides, so 2*(Length + Width)
Formula for area of Triangle: a=0.5(bh) Where b is the base length and h is the height. For example, a triangle of base 10 and height 5 has an area of 25.
Let the length be 6x and the width be x: 2(6x+x) = 98 12x+2x = 98 14x = 98 x = 7 Therefore: length = 42 cm and width = 7 cm Area = length*width = 294 cm2