Want this question answered?
inaccurate calibration insufficient control of the independent variable poor measurement techniques difficulties in reading measurements (low light, vibration, etc.) insufficient precision in measurement ambiguities in what is being measured measurement bias question bias failure to control other important variables that are not being measured (in the case of electronic measurements) interference or static
False
Not really, because the feather is too light to be accurately measured with an instrument indicating in kg.; it probably wouldn't even move the scale, therefore no reading, therefore no measurement!An adult human being could have their weight measured in kilograms, but a feather would more reasonably be measured in grams or perhaps milligrams. The weight of a feather could be expressed in kilograms, if it were first weighed by a sensitive instrument measuring in milligrams and then move the decimal point to express that measurement in kg. instead of mg., but most instruments used to weigh things in kilograms would likely not be accurate enough to weigh down to 0.001 or so kg.
This is the measurement recorded when, in fact, it should be 0. It is the measurement when there is nothing to measure but the reading is not exactly 0 because the calibration has gone off.
take reading 4 to 5 times, and take its average this will reduce error
It's signature figures
accuracy
Because the measurement of current is more convenient.we may take direct reading of current.
An example of a precision measurement is a reading of
inaccurate calibration insufficient control of the independent variable poor measurement techniques difficulties in reading measurements (low light, vibration, etc.) insufficient precision in measurement ambiguities in what is being measured measurement bias question bias failure to control other important variables that are not being measured (in the case of electronic measurements) interference or static
accuracy refers to how close a measurement is to the true or actual value. precision is a measure of the exactness of a measurement. so if playing darts high precision is like reproduicibility. you can get them all in the same spot. high accuracy would be scattered around the bullseye. if both then it would be close together near the bullseye.
Reading speed is commonly measured as words per minute (wpm). This is the number of words absorbed by the eyes and understood by the brain per minute. It is calculated by reading a known quantity of words over a timed period. Then divide that quantity of words by the time it took to read them. This is then one's reading speed in words per minute.
Interval
reading time!!
systolic
False
The importance of least count ( the highest degree of accuracy of measurement) helps calculate the margin of errors when doing measurements.