0
A ring topology is a network topology or circuit arrangement in which each network device is attached along the same signal path to two other devices, forming a path in the shape of a ring. Each device in the network that is also referred to as node handles every message that flows through the ring. Each node in the ring has a unique address. Since in a ring topology there is only one pathway between any two nodes, ring networks are generally disrupted by the failure of a single link.
The redundant topologies are used to eliminate network downtime caused by a single point of failure. All networks need redundancy for enhanced reliability. Network reliability is achieved through reliable equipment and network designs that are tolerant to failures and faults. The FDDI networks overcome the disruption in the network by sending data on a clockwise and a counterclockwise ring. In case there is a break in data flow,the data is wrapped back onto the complementary ring before it reaches the end of the cable thereby maintaining a path to every node within the complementary ring.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Which topology requires an RJ-45 connector?
It's used for Star topology.
What is the logical topology used for ethernet architecture?
Topology: physical ring of trees, logical ring
Connector used in of star topology?
rg 45
What type of cable would you to create a ring topology?
what type of cable would you used to create a ring topology?
Which topology is used to structure the internet?
ring
What network use star topology?
Star topology:- In this topology all PC are connected with the central device. Central may be HUB and SWITCH. Star widely use in all over word. Ring topology:- In this ring topology all PC are connected in the frame of ring are close Ring topology use MSAU each PC has a two never road one is called up Stream and called down stream. It used token passing Matterhorn which implement the token ring network. " Is the best of star topology".
Nodes transmitting when it is their turn?
You are thinking ring topology. Not used much today.
Which topology is the most commonly used server network topology?
The most common LAN topology is that of a "star." In a star topology, each computer, or "node", is connected to a central hub. This is more reliable than a more classical "ring" topology, because a node failing will not bring down the entire network. A bus topology is arguably more reliable, but has poorer performance.
What is ring topology?
the ring topology is a network within which all computer are connected like in a circle. The ring topology data transmission is depending on a token. it's a programme given to a computer to allow it to communicate with others computers. it's useful but if one computer goes down, the topology is down too.
Which connector would be used in a 10BASE2 Bus topology?
BNC connectors, Ts, barrel, 4ways, and the all important terminator.
What is local area network and ring topology?
A Local Area Network (LAN) may use many different types of topologies (how the network is physically wired). If one uses a ring topology, then a special type of managed hub is usually used which implements packet switching in a round, ring structure, in which each station is visited by the packet in linear sequence. Ring topologies also involve the use of a 'token', which describes whether a station on the ring may use the network or not. Ring topology can be considered as a LAN and it is rarely used nowadays.
What Types of network topology and give examples of each topology?
Network Topology refers to the way that cables and other pieces of hardware connect to one another. There are four common "base" types of topologies: bus, ring, star, and mesh. There are other types as well, but these are referred to as "hybrid topologies." The most commonly used network topology is a hybrid topology called the Star Bus Topology.
