The volume of the raw material required for a certain machine part is 2.02 cu.cm. The finished volume is 1.05cu cm. The time for machining each piece is 45 seconds for steel and 30 seconds for brass. The cost of steel is P32.50 per kg and the value of steel scrap is negligible. The brass is P60.00 per kg and the value of scrap is P25.00 per kg. The wage of the operator is P40.00 per hour and the overhead costs of the machine is P50.00 per hour. The weight of steel and brass are 0.0081 and 0.0088 kg per cu cm, respectively. Which will you recommend?
what is the weight per cubic inch of W50 steel
The cost of construction per square foot is the same as the cost of an automobile per inch of length.
Generally in marketing, it is the cost per 1000 on a production run.
What are excavations cost per square foot?
What rupees of per kg high speed steel
£7000000000000000 per gram
200
cost of steel 12''x18' i-beam per linear foot?
We want to sell scrap metal what is the cost for scrap metal per kg/
free
55767
Steel is most usually sold by weight, for that is how the manufacturer sees it. Both reinforcing steel, and sheet steel. The retailer (may) convert this into a price per sheet etc. But to answer your question, you need to know how thick the steel is, and also in what quantities.
one puond is probably $15 maybe?
Depending on the grade of steel that you want, the cost can be anywhere from $0.25 per foot, to approximately $18.00 per foot. These costs of course depend on the strength of the cable, the thickness, and the type of steel that they are made from. The upper end steel cables are ridiculously strong and are used for civil purposes such as holding suspension bridges together. The lowere end steel cables are generally strong enough to tow cars.
From 500 $/MTn to $30,000 depending on grade and market conditions.
You get exactly 187.5 xp per steel platebody in runescape which is probably the best way to raise smithing cost wise