0
1 1/2 inches in diameter.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
What is an example of only one millimeter?
A millimetre: diameter of a pin head.
What is 14.0 diameters equal to in millimeters?
A diameter is a characteristic of a circular shape, and has no intrinsic size. A big shape will have a big diameter and a small shape will have a small one. For example, the earth's equator has a diameter of approx 12800 kilometres while a pin has a diameter of around 1 millimetre.
Which word comes after drawing but before point?
pin drawing pin pin point
What does the P stand for in PIN?
The P in PIN stands for personal.
How many numbers does a pin have?
the average pin number is 4
What is a head of a pin?
The size of a pin head is roughly two mm in diameter. The size of a sewing needle head is roughly five mm in diameter.
What is the diameter of a pin head?
1.5 t o 2mm
What is an example of only one millimeter?
A millimetre: diameter of a pin head.
How wide is the head of a pin in microns?
There are 1,000 microns in a millimetre, taking a pin head of 1mm diameter then it must be 1,000 microns across.
What is 14.0 diameters equal to in millimeters?
A diameter is a characteristic of a circular shape, and has no intrinsic size. A big shape will have a big diameter and a small shape will have a small one. For example, the earth's equator has a diameter of approx 12800 kilometres while a pin has a diameter of around 1 millimetre.
Pin it indicates a load of 100kN that causes a stress of 204mpa what is the diameter of the pin in millimetres?
Stress is force per unit area. Area is pi*(diameter/2)^2 if 0.204 Pa=10^5 N / pi r^2 Rearrange for diameter D=2 (10^5/(pi*0.204)^0.5 Which gives you a huge diameter, unless your mPa were actually MPa which would change your answer by a few orders of magnitude.
What is the minimum height of a bowling alley?
The regulation height of a bowling pin is the same as the circumference. A Bowling Pin is 15 inches tall and 15 inches at the widest part of the pin!
Why does the water not leak from a styrofoam cup poked with a pin?
When the pin is pushed into the cup the polystyrene (Styrofoam) is temporarily pushed aside. When the pin is withdrawn the polystyrene reforms largely to its original location. If a drill was used, the same diameter as the pin and material was actually removed the cup would leak. Also the water tension of the water in front of a hole the size of a pin would prevent the water from leaking out.
What is a dressmaker pin mostly used for?
It is frequently asked, "How many angels can dance on the head of a pin?" The "pin" that is referred to is a dressmaker pin. This common pin is usually about 1 inch long with a round or flat head about 1/8 inch in diameter. It is used for pinning two or more pieces of fabric together before the fabric is sewn together with a needle and thread. Of course, the pins can be used to pin together paper, leather (if the leather is thin enough to push a pin through it), etc.
I had already pulled the pin on a grenade I had come up yo a crouch which literary device is most clearly shown in this excerpt?
parallelism - apex
What is the size of a pinhead?
The size of a pin head is roughly two mm in diameter. The size of a sewing needle head is roughly five mm in diameter.
Why the head of a pin compared to the diameter of a stadium is like an atom?
because the atom is the head and everthing else circles around it making it orbit around like the electron
