0
What is the exact volume of a cylinder that has a base of 12mm and the height is 24mm?
Wiki User
∙ 9y ago
Exact is difficult but it is approximately 2.713 cc.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How do you find height of 15mm 12mm 9mm?
Assume we have the dimension 15 mm by 12 mm by 9 mm. Then, the height usually occurs on the last part of the dimension, which is 9 mm.
If an object 18mm high is placed 12mm from a diverging lens and the image is formed 4mm in front of the len what is the height of the image?
6mm
How many cm in 12mm?
1.2 cm in 12mm
Weight of 12mm diameter steel of 12 meter length?
Density of steel: 7.85 g/cm3 Volume of the steel would be: 0.6*0.6*pi*1200=1357.168 cm3 =10653.77grams=10.65kg.
Is 12 mm greater than or less than 0.07m?
12mm is less than 0.07m.12mm=1.2cm=0.012m.12mm can be thought of as "12 thousandths of a metre", just as 0.07m can be thought of as "70 thousandths of a metre".
What is the volume of a pipe with a radius of 3.1mm and a height of 12mm?
The volume is 90.57 mm3
What is the lateral area of a right cylinder if the radius of the base is 12mm and the altitude of the cylinder is 60mm?
A right cylinder having a base radius of 12mm and a height of 60mm has a lateral area of approximately 4523.89mm2
What is the lateral area of a right cylinder if the radius of the base is 12mm and the altitude of the cylinder is 5 times the base radius?
2pi(r) multiplied by the height is lateral area of right cylinder. 2Pi(r) being the circumerfence of one of the bases.
What is the volume of a right rectangular prism with the measures of 8mm 35mm and 12mm?
8*35*12=3360mm cubed
How do you find height of 15mm 12mm 9mm?
Assume we have the dimension 15 mm by 12 mm by 9 mm. Then, the height usually occurs on the last part of the dimension, which is 9 mm.
If an object 18mm high is placed 12mm from a diverging lens and the image is formed 4mm in front of the len what is the height of the image?
6mm
What is 12MM plus 12CM?
12mm + 12cm
How many cm in 12mm?
1.2 cm in 12mm
Lug nut size on 1987 El Camino?
12mm 12mm
What do you use to remove the cylinder heads on a 1995 Ford Probe GT?
YOU NEED 12MM 12 POINT 3/8 DRIVE DEEP IMPACT SOCKET. NAPA HAS THE SET YOU NEED
What is the cylinder head torque spec for a 1997 Yamaha Vmax 700 SX snowmobile?
tighten the 12mm bolts in a criss cross pattern to 8ft lbs then retighten to 17ft lbs
What types of drill bit to be used for hole of 12mm dia in 12mm SS plate?
A standard HSS drill bit in 12mm is all that's needed.
