Study guides

Q: How many cubic meters are there in 384 inches?

Write your answer...

Submit

Related questions

384 inches = 9.75 meters.

The floor is 4 times 288 times 384 cubic inches, or 442,368 cubic inches. 1 inch = 2.54 centimeters. Thus, 1 cubic inch = 2.54 times 2.54 times 2.54 cubic centimeters, or 16.387064 cubic centimeters. So 442,368 cubic inches is 7,249,112.727552 cubic centimeters. Each cubic centimeter is 0.000001 cubic meters (1,000,000 cubic centimeters = 1 cubic meter). So the floor is 7.249112727552 cubic meters. You can essentially call this 7.25 cubic meters. You can also determine from this that a cubic inch is 0.0000016387064 cubic meters, which can be used as a shortcut.

384 cubic inches.

around 384 cubic inches

288 inches = 7.3152 meters and384 inches = 9.7536 metersso, the answer is 71.34953472 square meters

No comparison. cu. ft .is volume and inch is length.

The distance to the Moon is about 384,000 km or 384 million meters. To convert that to inches, remember that 1 inch = 0.0254 meters, so you can divide by this last number.

Volume = 12*4*8 = 384 cubic inches

16x24=384 inches 384/12=32 feet which is your answer.

384 cubic metres, presumably.

384 ft2 = 55296 in2

384 inches is 32 feet. (divide inches by 12 to get feet)

1.3 gallons or 301.6 cubic inches.Improved Answer:-Volume: pi*8*8*6 = 384*pi cubic inches

32 foot is 384 inches

There are 384 inches in 32 feet.

384 square inches

32 feet

384 cubic feet. Its simple math.

There are 12 inches in one foot, so there are 384 inches in 32 feet

384 inches

Concrete is usually measured in Cubic Yards. You normally have linear feet and inches for measurements. The basic equation for volume is simple: h x w x d = V Where: h = Height, w = Width, d = Depth, V = volume So if we have a slab that is 32 feet by 26 feet by 4 inches, first we must have all measurements in the same units. 32 feet = 384 inches. 26 feet = 312 inches. The depth (or height) is already in inches, 4. So we need to know the following: h = 4, width = 312 and depth = 384 inches = our volume or how many cubic inches. With that in mind, then: h x w x d = V 4 x 312 x 384 = V 4 x 312 x 384 = 479232 cu. in. Now how do you turn Cubic Inches into Cubic Yards? There are 1728 cubic inches in a cubic foot. So 479232 cu. in. divided by 1728 = 277.33 cu. Ft. There are 27 cubic feet in a cubic yard, so 277.33 cu. Ft. divided by 27 = 10.27 cubic yards. So, if I had to pour the pad, I would order 10 1/2 yards of concrete to get the job done. I hope this helps you understand how to figure volume for an area and depth. This same equation can be used to compute all area to volume conversions for homeowners. You would use the same steps to convert your yard measurements to figure top soil. There are web sites (like this one http://www.easysurf.cc/cnver7.htm) that can give you conversion factors for just about anything.

To convert inches to feet just divide by 12 (since there are 12 inches per foot) -384 / 12 = 32 feet

512^1/3 = 8 (inch) = length per side of cube82 = 64 = (sq inches) Area per side. There are 6 sides in a cube.64*6=384 (sq inches) Answer384 square inches surface area in a cube of volume 512 cubic inches.

There are 12 inches in one foot. Therefore, 32 feet is equal to 32 x 12 = 384 inches.

384 mm = 15.1 inches, approx.