Want this question answered?
You need a three way switch to control lights from two locations. The name is misleading. Three way switch refers to the connection points on the switch. You can use a three way switch as a single switch as long as you place hot wire on the brass screw and the use any of the other screws for the return hot.
If you have the symbol for a regular switch, a 3-way switch is the same symbol with a '3' next to it like a subscript.
An intermediate or 4 way light switch has 4 terminals + 1 ground terminal.
A single pole switch controls a light or outlet at one location. A 3 way switch controls a light or outlet from 2 locations.
"How does a single pole switch differ from a three way?" is a trick question often asked to catch-out new trainee electricians because the common but mis-named "three-way switch" is actually a single pole, double throw switch, i.e. it is only a 2-way switch, not a 3-way switch.A pair of "3-terminal, single pole, double throw" switches are often used to hook-up two separate light switches to control one light or one set of lights.A proper "3-way switch" would be capable of being switched to 3 different positions and could have one, two or more poles. Each pole could be either single- or double-throw.The same answer put in a different wayDespite the fact that the name "3-way switch" is often used to describe it, if it is of the type that has just one pole that can only be physically switched 2 ways, the name "3-way switch" is quite wrong for that particular switch. A "3-terminal, single pole, double throw" switch" is a more accurate description for it.Comment'Three-way switch' -American term. 'Two-way switch' -UK term for the same type of switch. Used to operate a lamp from two different locations.
On a 1999 Ford Expedition : The Multi-Function switch is INSIDE the steering column cover ( your turn signal lever and the four way hazard button stick outside the cover )
You can fix the brake booster switch in your 1991 Jaguar by replacing the brake booster switch. In most cases when the brake booster switch does not function properly the only way to fix it is to replace it.
You have to remove the steering wheel and driver airbag to replace this multi function switch....trust me I had to do it.
We are stationed in Germany and my wife is having family problems back in Florida. We are just interested in getting to a base back in the states and heard there is a way we can "switch" with someone. How do we go about doing this?
Check all fuses first. If all of them are good, you probably have a bad multi-function switch. The only way to correct that is to replace the switch. The switch is at the end of the turn signal lever inside the steering column.
So the front of them is flush with drywall is the correct way.
can drinking water flush benadryl out our system faster
hi im on city water and toilet isn't plugged but it doesn't flush all the way like there is not enough pressure
First you need to decide what you are trying to accomplish. You can wire the Timer switch in series with or parallel to the 3-way switches. If in series then the 3-way switch function would depend on the timer state. If the Timer switch was ON then the 3-way switch could turn the connected device ON or OFF from either location. If the Timer switch were OFF the device would be OFF no matter what you did with 3-way switches. To wire in this fashion put the timer between the supply and the input to the switches. If the Timer is in parallel then if the Timer is ON it doesn't matter what you do with the 3-way switch, the device will be ON as long as the Timer is ON. If the Timer is OFF then the 3-way switches will work in their normal fashion. To wire in parallel connect the supply to one side of the Timer and the device to the other.
NO.
down
No to smoke