Want this question answered?
1 verticie oxygen oxygen
This kind of conic section is a circle
cone
a cone has circle at bottom
cone
It is the portion of the flame in the middle. (the upper edge of the center/inner cone of the flame)
Of a Bunsen Burner flame? Combustion takes place in all parts of the flame.
1 verticie oxygen oxygen
If you turn it to the "Roaring Blue Flame" you should see a small blue cone within the actual flame, the hottest part is actually just above that cone, contrary to common mistake that it is inside the "blue cone". The blue cone is just the gas that has not been ignited yet.
The tip of the blue cone is the hottest part of the Bunsen burner flame.
the bottom of the outer
A Bunsen burner flame consists of an inner cone and an inner cone. In the inner cone, no combustion is occurring and the inner cone consists of a mix of air (which has been introduced through the vents in the bottom of the barrel) and gas. In the outer cone, combustion is occurring. Hence a Bunsen burner flame is "hollow;" there is no flame in the inner cone. Because air, containing oxygen, is present in the inner cone, it is called the "oxidizing zone." A piece of red hot copper held inside the inner cone will oxidize, being covered with a layer of black copper oxide.
The function of a cone is to keep the animal from scratching/biting/ licking the affected or injured or area that has had surgery.
The hottest portion of the non luminous flame is the inner cone (light blue center).
2, the inner most cone and the outer.
#1 there will only be 2 visible flames, the inner cone and the outer envelope. #2 the flame will be soft (quiet) #3 the inner cone will be well defined and fat.
The flame may be adjusted in two ways. To just reduce the flame height reduce the gas flow. To lessen the cone, partly close the air supply valve (the sleeve at the bottom of the burner). If closed all the way the flame will become yellow and possibly smoky.