that's the earth plug and it must be connected, otherwise circuit protection will not operate properly.
You can't but you can install a plug on the end of a cord. Just go purchase one and install it. Very simple to do. Black wire goes to copper screw, white wire goes to silver screw, and ground or green wire goes to ground screw. It both wires are brown then connect the wire with the ridges on the outside of the wire to the silver screw as it is the neutral. The wire that is smooth is the black hot wire which connects to the copper screw.
Answer for UK, Europe and countries running a 50 Hz supply service.It all depends on which connection you are using. Alternating Current (AC) or Direct Current (DC). In AC there are generally two modes of transmission. Single Phase or Three Phase. In case you don't have 3-phase connection just combine yellow and green.According to Standard, Green is for the Earth Wire and Red is for the Live wire. Blue or Black is for the Neutral Wire. So best option is to combine the Yellow and Green.
Wall receptacles are wired in parallel. black to black, white to white, ground to ground.
If there is no ground wire connect the ground wire to the neutral wire.
The live wire is brown in coulor while the earth wireis green and yellow in color and neutral wire is blue in colour. Uses of these three wire: Live wire:It's connected with fuse.It carries a voltage which drives electric current through the electrical appliances. Earth wire:It is a safety device and protect us from electric shock. Neutral wire:It offers a return path by electric current.
The green and yellow is the earth wire The brown is the live wire The blue is the neutral wire A poem to help is: The brown live cow drinks from the blue neutral water and eats the green grass from earth
Live Wire = usually brown, if not then its grey or black. Neutral Wire = Blue Earth Wire = green and yellow striped
everywhere i have read says it is the yellow/green wire in the driver kick off the ecu plug.
Green with Yellow Stripe Wire - Earth Wire (E) Blue Wire - Neutral Wire (N) Brown Wire - Live Wire (L) When you look at the plug with the terminals facing towards you: /\ / \ / E \ / \ / \ / L N \ ------------------
I cut the stock plug from the 97 sportage and wired an aftermarket stereo with this and it worked great. The wires are a little short but it can be done. Constant 12V+ Wire: Light Green Ignition Switched 12V+ Wire: Black/Yellow Ground Wire: Black Illumination Wire: Blue/Yellow Dimmer Wire: N/A Left Front Speaker Wire (+): Green Left Front Speaker Wire (-): Blue/Red Right Front Speaker Wire (+): Light Green/Yellow Right Front Speaker Wire (-): Black/Green Left Rear Speaker Wire (+): Green/Yellow Left Rear Speaker Wire (-): Blue/Orange Right Rear Speaker Wire (+): Green/White Right Rear Speaker Wire (-): Green/Blue
you cut the yellow and black wire from the origanal plug and wire these from the CD player wire the yellow, red, blue, wire into the yellow and the black from origanal plug to black on CD player
If you are hooking up a trailer plug the left turn signal wire is yellow and the right turn signal wire is green.
Brown = Hot Blue = Neutral Yellow/Green = Ground
Left is yellow, right is green, tail lights are brown.
Red =Brakes or not used Green/yellow right turn Yellow/brown left turn Black= hot White= ground
Constant 12V+ Wire: Light Green Ignition Switched 12V+ Wire: Black/Yellow Ground Wire: Black Illumination Wire: Blue/Yellow Dimmer Wire: N/A Left Front Speaker Wire (+): Green Left Front Speaker Wire (-): Blue/Red Right Front Speaker Wire (+): Light Green/Yellow Right Front Speaker Wire (-): Black/Green Left Rear Speaker Wire (+): Green/Yellow Left Rear Speaker Wire (-): Blue/Orange Right Rear Speaker Wire (+): Green/White Right Rear Speaker Wire (-): Green/Blue
The colour of earth wire is yellow and green now you may ask why well the reason is that the green one as well yellow color is used as Earth's wire. This is because the green and yellow type wires are for grounding purposes or we can say earthen purposes. Green colored wires are used in an electric circuit for grounding.