+19/-0 micrometres for H6 over 50mm up to 80mm dia
1000 mm = 1 m so 70 mm = 70/1000 = 0.07 metres. Simple!
10 mm = 1 cm 20 mm = 2 cm 30 mm = 3 cm . . 70 mm = 7 cm
110 mm = 4.3307 inches 70 mm = 2.7559 inches 110 mm * 70 mm cannot be expressed in inches since 110 mm * 70 mm is a measure of an area while an inch is a measure of distance.
About this big - |.......................................................................|
One cm contains 10 mm. So, 7 x 10 = 70 mm.
H6 tolerance for 95 mm hole is +0.022/0
70 µm = 0.07 mm
1000 mm = 1 m so 70 mm = 70/1000 = 0.07 metres. Simple!
I came across the same question myself. The plug hole is on the radiator side of the engine behind the exhaust. Mine was a size 14 mm bolt.
S=16T/pi()d^3 70N/mm^2=16*(1 x 10^6 N-mm)/(pi()*d^3) d = 41.75mm
10 mm = 1 cm 20 mm = 2 cm 30 mm = 3 cm . . 70 mm = 7 cm
110 mm = 4.3307 inches 70 mm = 2.7559 inches 110 mm * 70 mm cannot be expressed in inches since 110 mm * 70 mm is a measure of an area while an inch is a measure of distance.
There are 10 millimetres in a centimetre. You need to multiply cm by 10. Therefore 7*10 is 70 millimetres.
25.4 mm = 1 in →70 mm = 70 ÷ 25.4 in ≈ 2.76 in
3.3
20mm
ø60 mm (+0.348/+0.340)