0
What else can I help you with?
How do you calculate the ideal mechanical advantage of a lever?
It's 1. IMA = Distance in / Distance out. A single pulley doesn't do anything toward mechanical advantage, it changes the direction of the force. Not always. A single-axeled pulley (the typical pulley) has an IMA of 1, having one axel. If there was a second axel, then the IMA would = 2, so on and so forth. The easy way to do it is IMA = # of axels.
Do real gases behave like ideal gases except at very high temperatures?
Gases behave most ideally at low pressure and high temperatures. At low pressures, the average distance of separation among atoms or molecules is greatest, minimizing interactive forces. At high temperatures, the atoms and molecules are in rapid motion and are able to overcome interactive forces more easily.
What is ideal residential water pressure?
How high is the building and what are the GPM /PSI requirements of the fixtures
Disadvantages mechanical press?
Max forging force is not as high as screw or hydraulic presses.
What is the disadvantageand advantage of Superheterodyne receiver?
can a superheterodyne receiver generated high noise
What is the ideal mechanical advantage of a lever 7 meters long and 3 meters high?
The ideal mechanical advantage of the bar is 5.
A stone block is pushed up a ramp that is 120m long and 20m high. what is the ideal mechanical advantage of the ramp?
The ideal mechanical advantage of a ramp is calculated by dividing the length of the ramp by the vertical height. In this case, the ideal mechanical advantage of the ramp is 120m (length) divided by 20m (height) which equals 6. Therefore, the ideal mechanical advantage of the ramp is 6.
What is the mechanical advantage of a ramp that is 10 meters long and 2 meters high?
5J because 10/2=5
How do you calculate the ideal mechanical advantage of a lever?
It's 1. IMA = Distance in / Distance out. A single pulley doesn't do anything toward mechanical advantage, it changes the direction of the force. Not always. A single-axeled pulley (the typical pulley) has an IMA of 1, having one axel. If there was a second axel, then the IMA would = 2, so on and so forth. The easy way to do it is IMA = # of axels.
The great pyramid is 146 meters high how long is a ramp from the top of the pyramid to the ground that has a mechanical advantage of 4?
204 inches
Which has a greater ideal mechanical advantage a ramp that is 12 m long and 2 m high or a ramp that is 6 m long and 2 m high?
Since the heights are the same, then the longer ramp.
What is maximum value of mechanical advantage?
Mechanical advantage is maximum when weight lifted is extremly high and for which C/W is extremely small so as to be negleted, Max. Mechanical Advantage=1/m
What is the mechanical advantage of a ramp that is 8 m long and 2 m high porch?
The mechanical advantage is 8/2 = 4.
Is it good to have a high mechanical advantage?
It may be good in some cases. A high mechanical advantage comes at a cost - you need to apply less force, but you need to apply it over a greater distance.
Does a first class lever have a high MA?
A first-class lever can have a mechanical advantage greater than, equal to, or less than 1, depending on the relative distances between the fulcrum, effort force, and load. It does not inherently have a high mechanical advantage.
A wheelchair ramp needs to be 8 inches high How long does it have to be to have a mechanical advantage of 5?
3.3 ft
What is the IMA of a inclined plane 8m long and 2m high?
The ideal mechanical advantage (IMA) of an inclined plane is calculated by dividing the length of the plane by the height. In this case, the IMA would be 8m (length) divided by 2m (height) which equals an IMA of 4.
