0
Which has a greater ideal mechanical advantage a ramp that is 12 m long and 2 m high or a ramp that is 6 m long and 2 m high?
Wiki User
∙ 9y ago
Since the heights are the same, then the longer ramp.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
What is the mechanical advantage of a ramp that is 8 m long and 2 m high porch?
The mechanical advantage is 8/2 = 4.
What is the mechanical advantage of a ramp that is 10 meters long and 2 meters high?
5J because 10/2=5
What is the mechanical advantage of an inclined plane that is 5 m high and 20 m long?
5/20 = 1/4 or 0.25
What is the theoretical mechanical advantage of a 5 m long inclined plane that has the high end 1 m above the ground?
1/5 = 0.2
What is the mechanical advantage of a ramp 8 m long that extends from the sidewalk to a 45633 m high porch?
Zero: the ramp cannot be shorter than the height to which it is suppose to reach. I suspect there is a missing decimal point.
What is the ideal mechanical advantage of a lever 7 meters long and 3 meters high?
The ideal mechanical advantage of the bar is 5.
A stone block is pushed up a ramp that is 120m long and 20m high. what is the ideal mechanical advantage of the ramp?
The ideal mechanical advantage of a ramp is calculated by dividing the length of the ramp by the vertical height. In this case, the ideal mechanical advantage of the ramp is 120m (length) divided by 20m (height) which equals 6. Therefore, the ideal mechanical advantage of the ramp is 6.
Is it good to have a high mechanical advantage?
It may be good in some cases. A high mechanical advantage comes at a cost - you need to apply less force, but you need to apply it over a greater distance.
Does a first class lever have a high MA?
A first-class lever can have a mechanical advantage greater than, equal to, or less than 1, depending on the relative distances between the fulcrum, effort force, and load. It does not inherently have a high mechanical advantage.
How do you calculate the ideal mechanical advantage of a lever?
It's 1. IMA = Distance in / Distance out. A single pulley doesn't do anything toward mechanical advantage, it changes the direction of the force. Not always. A single-axeled pulley (the typical pulley) has an IMA of 1, having one axel. If there was a second axel, then the IMA would = 2, so on and so forth. The easy way to do it is IMA = # of axels.
What is maximum value of mechanical advantage?
Mechanical advantage is maximum when weight lifted is extremly high and for which C/W is extremely small so as to be negleted, Max. Mechanical Advantage=1/m
What is the mechanical advantage of a ramp that is 8 m long and 2 m high porch?
The mechanical advantage is 8/2 = 4.
A wheelchair ramp needs to be 8 inches high How long does it have to be to have a mechanical advantage of 5?
3.3 ft
What is the IMA of a inclined plane 8m long and 2m high?
The ideal mechanical advantage (IMA) of an inclined plane is calculated by dividing the length of the plane by the height. In this case, the IMA would be 8m (length) divided by 2m (height) which equals an IMA of 4.
A ramp is 1.0 m high and 3.0 m long. What is the IMA of the ramp?
The ideal mechanical advantage (IMA) of a ramp is calculated by dividing the length of the ramp by its vertical height. In this case, the IMA would be 3.0 m / 1.0 m = 3.0.
What is the mechanical advantage of a ramp that is 10 meters long and 2 meters high?
5J because 10/2=5
How can we compare and contrast work mechanical advantage and efficiency?
Mechanical advantage measures the ratio of output force to input force, showing how much a machine amplifies force. Efficiency, on the other hand, measures how well a machine uses energy and is the ratio of output work to input work. A high mechanical advantage means a machine can achieve a large force output, while high efficiency means a machine minimizes wasted energy during its operation.
