The length of line between points (-10, 1) and (-5, -2):
length = sqrt(x_difference2 + y_difference2)
= sqrt((-5 - -10)2 + (-2 - 1)2)
= sqrt(52 + (-3)2)
= sqrt(25 + 9)
= sqrt(34)
~= 5.83
100% of 52=52 10% of 52 (divide by 10)=5.2 1% of 52 (divide by 10)=.52 2% of 52 (multiply the 1% by 2)=1.04
x2/52 + y2/93 = 1
y2/52 - x2/72 = 1
True
The factors of 10 are 1, 2, 5, and 10 The factors of 52 are 1, 2, 4, 13, 26, and 52
If the line segment is 1 inch shorter than the other line segment in Hopeton, then the length of the line segment would be 1 inch less than the length of the other line segment. So, if the other line segment is x inches long, then this line segment would be x - 1 inches long.
As the y-coordinates are the same, the length of the line segment is the difference in the x-coordinates → length 8 - 3 = 5 units
13 units in length
Using the distance formula the length of the line segment from (10, -3) to (1, -3) is 9 units which means that the line segment is partitioned by 2 units and 7 units. To find the coordinates of point R plot the above information on the Cartesian plane.
By unit of length and distance and conversion ,we can say that 1 cm=10 mm 52 cm=520 mm which is greater than 470 mm.
Slope is expressed as the percentage of rise/fall in elevation over a specific distance and is determined by dividing the change in elevation by the length of the line. So if a line segment is 10 feet long and rises or falls 1 foot in elevation, the slope would be 1 ft/10 ft or 10 percent.
The probability of drawing a 10 out of 52 cards is 4 in 52, or 1 in 13, or about 0.07692.