0
When discussing electricity it is common to break into two parts. There is the supply side which is where the power exists and the load side where the work gets done. In a lighting the supply side would be your house power, for example; and the load would be the bulb. In a flashlight the supply is the battery and the load is the bulb.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Which side of a transformer is the load connected to?
It is connected to the secondary side.
Why does a transformer blow the circuit breaker on the primary side if it is not connected to a load on the secondary side?
A normal transformer should not blow the primary side breaker when it is not connected to a load on the secondary. If it does, something is wrong. Check for shorted or burned windings. Make sure that it is indeed disconnected from the load - it might still be connected to something that is also presenting a fault.
Which side of a motor contactor should the overload contact be placed?
On the load side of the contactor. T1,T2,T3.
How is a kettle wired?
A kettle is wired in series when it is plugged into the household receptacle. The "hot" potential is on one side of the resistive load and the neutral return wire is on the other side of the resistive load.
When an ammeter is connected in a circuit which terminal of the battery must be connected to the positive terminal of the ammeter?
The positive terminal of the battery would be connected to the positive terminal of the ammeter. The load would then be connected between the two negative terminals, positive side of the load being connected to the negative side of the ammeter.
What is load compensation?
compensation of load by connecting a compensating device which adjust the real and reactive power in the distribution side or load side.
Where are all the controls on most circuits?
Power supply
What is the length from the fulcrum to the load?
That is the distance between the load and the fulcrum. The load may be on the far side, or the near side of the fulcrum. One often overlooked fact, is that as the distance from load to fulcrum increases, the load on the fulcrum decreases.
Which side of a transformer is the load connected to?
It is connected to the secondary side.
Where is the load arm on a pulley?
The load arm is the radius of the pulley. This is the distance from the fulcrum to the load-carrying side of the rope.
What is the difference between a side by side migration and a wipe and load migration?
in side by side migration , you have two cmputers running simultaneously. in a wipe and load miration you have only one computer running.
What is the load side of a transformer?
The load side of a transformer feeds the device, such as a light or motor. It is the output of the transformer. The input, or line side, provides the voltage that is to be transformed, either up or down, to supply the load side.AnswerA transformer's primary winding is connected to the supply voltage, and the secondary winding is connected to the load.
How is a Load applied to a ac generator?
The load conductor is connected to the load side of the generator breaker. Once the generator is up to speed the load breaker is closed and the voltage is then applied to the load.
What is the definition of the resistance arm?
The resistance arm is the side of the lever (from the fulcrum to the load) that carries the load.
What is the best way to carry a load when driving on a ramp?
With a forklift, carry the load on the uphill side.
How do trains travel on bends Are there any parts on the side that are attached?
When a train travels around a curve, there is a side load that is exerted which is carried as a side load on the wheels. However, many rail beds are prepared such that they have a slope that reduces the side load---just like a highway. This slope is so slight that it is not easily seen.
What happens when a load is applied to the beam?
when the load is applied in the beam then deflection takes place. the nature of the deflection depends on the support provided on it
