Per national electrical code you are only allowed 360 degrees which is 4, 90 degree bends before having to use a pull box or termination.
The electrical code states that there will be no more that 4 quarter bends between junction boxes. Keep in mind when conduit bending that an offset of two 45 degree bends is classed as a 90 degree bend. Offsets between two junction boxes uses up two of the four 90 degree bends allowed.In a conduit run between J boxes the number of bends can not exceed 360 degrees.The electrical code allows four 90 degree bends between pull boxes.
The maximum number of bonds made between adjacent carbons is 3. So the maximum number of electron pairs is 3.
The minimum and maximum refers to the number of sunspots.
Three number three wires can be installed in an inch and one quarter conduit.
9 - Is this a test answer or do you just want to know for a project you're doing? Take a look at NEC chapter 9 - tables 4 and 5 (in the 2005 edition at least)
The electrical code states that there will be no more that 4 quarter bends between junction boxes. Keep in mind when conduit bending that an offset of two 45 degree bends is classed as a 90 degree bend. Offsets between two junction boxes uses up two of the four 90 degree bends allowed.In a conduit run between J boxes the number of bends can not exceed 360 degrees.The electrical code allows four 90 degree bends between pull boxes.
The degree is equal to the maximum number of times the graph can cross a horizontal line.
The maximum number of bonds made between adjacent carbons is 3. So the maximum number of electron pairs is 3.
There are [countably] infinite rational number between any two rational numbers. There is, therefore, no maximum.
The minimum and maximum refers to the number of sunspots.
The minimum and maximum refers to the number of sunspots.
Conduit sizing is based on the number of conductors that are drawn into it. Without the number of 1000 MCM conductors, an answer an not be given.
In-degree is a count of the number of ties directed to the node, and out-degree is the number of ties that the node directs to others.
Degree the number of entity types that participate in a relationship.
Three is the number of maximum hops between domain controllers
6 maximum points of intersection
The amount of conductors per conduit size example code says 3 number 4 conductors in a 1'' conduit