0
The term plus/minus is used to state the acceptable range of values for a number, or the estimated error of a measurement. If, for instance, you said 3.7+/-0.2, you would be saying "between 3.5 and 3.9". The term +/- is written as a plus sign, +, with a line drawn under it, so that it appears as an equal sign, =, moved down slightly, with a verticle line at the center extending from the bottom line to above the top line. (I describe it here, because symbols do not seem to be available in this forum.)
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the maximum acceptable tolerance for penetrating a domestic ADIZ overland and over sea.?
Overland - Plus or Minus 10 miles; Plus or minus 5 minutes Oversea - Plus or Minus 20 miles; Plus or minus 5 minutes
Calcuate the quantity of x and it's maximum error if x equals 6a plus 4b where a equals 40 tolerance is plus or minus 2 and b equals 20 plus or minus 2?
320 tolerance +/- 20 ? Did I get it right?
What is purple minus red plus yellow minus blue plus red minus yellow plus blue?
Purple.
Why do you use subtraction when you add a positive integer and a negative integer?
Because adding a negative is the same as subtracting a positive. In other words, minus a plus is he same as plus a minus. For example 5+ (-3) = 5-3 = +2 5 -(+3) = 5-3 = +2 Remember minus a plus = = minus plus a minus = minus plus a plus = plus minus a minus = plus
What are the plus and minus called in algebra?
They are called plus and minus - no difference there!
What is the machining tolarence for 350mm?
Tolerances are specified on the schematic drawings machinists use to create the part. It depends on the particular engineer's design. If, for instance, the tolerance was plus or minus 1%, then the tolerance at 350mm would by plus or minus 0.35mm. Some specification require tigher tolerance. For instance, I once specified an aluminum panel to be 3 inches plus 0, minus 0.010 - that's nearly, but not quite 0.1%.
What does tolerance mean with respect to an electrical component?
A tolerance of 10% means that the component's "size" will be within plus or minus 10% of its stated "size". A tolerance of 1% means that the component's "size" will be within plus or minus 1%
What is the maximum acceptable tolerance for penetrating a domestic ADIZ overland and over sea.?
Overland - Plus or Minus 10 miles; Plus or minus 5 minutes Oversea - Plus or Minus 20 miles; Plus or minus 5 minutes
Calcuate the quantity of x and it's maximum error if x equals 6a plus 4b where a equals 40 tolerance is plus or minus 2 and b equals 20 plus or minus 2?
320 tolerance +/- 20 ? Did I get it right?
What is bilateral tolerance for 15 plus 000 minus 0.005?
14.9975±0.0025
Difference between bilateral and unilateral tolerance?
Unilateral Tolerance :- A tolerancing method using a deviation in only one direction, either plus or minus, from the specified dimension Bilateral Tolerance :- A tolerance method using an equal plus and minus deviation from the specified dimension.
A resistor is marked with the following color bands brown black red and gold What is the resistance of this resistor?
1000 ohms = 1Kohm; silver is the tolerance band of the resistor. Silver signifies plus or minus 10%. The fourth band is always the tolerance band. If there is no tolerance band, the tolerance is plus or minus 20%. A gold band would signify plus or minus 5%.
How can you tell the difference between a general and specific tolerance on a drawing?
IDK that is why i askedGeneral tolerance refers to all untoleranced dimensions, and should be covered by a note on the drawing, eg tolerance unless noted otherwise plus or minus 0.25 mmSpecific tolerance will be included with the individual dimension, either as dimension limits or dimension plus tolerance.
Does plus minus mean plus?
Same mathematical signs equal plus Different mathematical signs equal minus Plus Plus = Plus (+)(+) = + Minus Minus = Plus (-)(-) = + Plus Minus = Minus (+)(-) = - Minus Plus = Minus (-)(+) = - So the direct answer to your question would be: plus minus equals minus
What is a plus and a plus if a plus and a minus is a minus?
A plus + a plus is a plus.
Calculate the following 7 - -2 equals?
A minus and a minus makes a plus A plus and a plus makes a plus A minus and a plus or plus and a minus makes a minus 7 - -2 is a minus and a minus Therefore the answer is 7 + 2 = 9
What does a minus plus a minus equal9?
A minus plus a minus will give a sum with a minus also.
