0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which mode has seen the greatest increase in US freight ton mile between 1990 and 2006?
Rail
What is the use of expansion in your daily life?
take example for the rail way tracks. they are gaps in between to allow expansion on hot days, especially in the afternoon
What is single Point Injection?
common rail disel injection
What is a railway line which has only one rail to travel upon?
A monorail.
Which is a real-world example of two planes intersecting?
a rail-road crossing.
How do you place spindles on a hand rail?
This depends on ones skill; but the easiest technique for a do-it-yourselfer is to set the handrail in place first. Spindles or balusters with square stock on both ends would do best. Place the spindles, usually two per step, so they will be spaced evenly from step to step. Scribe a line on the upper square stock of the spindle from under the handrail. This will give you the angle of cut for all spindles; but you should check to insure that all lengths are the same. Even a 1/16th of an inch will make a difference in the spacing of spindles. Set the bottom square stock to the step or tread. Drill a pilot hole with a countersink drill into the upper square stock into the hand rail. Insure that this pilot hole is drilled on the upper side of the staircase. I would recommend a #8 countersink drill and #8 screws, at least 2" in length. Continue up the staircase and good luck. Enjoy your great job.
How do you put 140 ft of hand rail in to linear feet?
Feet and linear feet are the same measurement - linear feet is merely used as a clarification to avoid confusion between them and square, or cubic feet. Therefore, 140 feet is equal to 140 linear feet.
What is the hand rail for a stair called?
banister
What are the main diffrences between Suburban Rail and Rapid Transit Rail Networks?
The main differences between Suburban Rail and Rapid Transit Rail Networks is the services that they provide.
What is the difference between balusters and balustrades?
balusters are the supports to the hand rail in stairs while a balustrade/banister include the handrail and balusters in stairs.
What is standard height for hand rail?
36 inches
Was Paul Rodriguez the first to land a 360 flip frontside crooked grind down a hand rail?
Yes Paul rodriguez was the first to land this trick on a hand rail
What is the difference between tube and rail?
tube is underground but rail is on the ground :)
What is the back of a chair called?
When there is a lower part, it is referred to as the "lumbar support" , otherwise it's simply the "seat back". There are many names for more specific parts such as "crest rail", "slats", "spindles", etc.
What is a standard height of hand rail on a landing?
1100mm minimum.
Does lowes sell prefabbed wrought iron hand rail?
No.
What is the difference between light rail and rapid rail?
Light rail is for street cars and trolleys. Rapid rail is for high speed trains and subways.
