wattmeter is constructed such that it read only power on a single scale. Only single scale will avilable to read the measured power. In order to take the acuurate reading just we measure the reading and we will multiple along with factor called multificaion factor. That's depends on on which voltage knob we connected and also the current.
Multification factor can be dtermind by:
Multification factor =(voltage range*current range*pf)/Max scale deflection...
Multiplication factor can be derived from Meter CT, Meter PT, Connected CT and Connected PT values.
A wattmeter reads the true power of a load, regardless of its power factor.
watt meter is constructed such that it read only power on a single scale. Only single scale will available to read the measured power. In order to take the accurate reading just we measure the reading and we will multiple along with factor called multiplication factor. That's depends on on which voltage knob we connected and also the current. Multiplication factor can be determined by: Multiplication factor =(voltage range*current range*pf)/Max scale deflection.
1 cubic meter = 1 kilolitre
The conversion factor from lux to watts per square meter (W/m2) is 1 lux 1 watt per square meter.
K=(voltmeter range*ammeter range*power factor)/wattmeter range
There is no volt meter or amp meter in a DC watt meter.
So that the result that you find on the watt meter after resetting it will be accurate
multiplying factor = Line CT Ratio / Meter CT Ratio Usually it is mentioned on Meter that MF = 1 if CT Ratio is 200/5 or MF = 2 if CT Ratio is 400/5. There can be an additional multiplication factor that would be mentioned on the meter.
1 Watt = 1 Joule / Second = 1 Newton-meter / Second.
Factor multiplication is the process of multiplying prime factors. The product of factor multiplication is the number that the prime factors are multipilicands of.
what do you mean by multiplication