0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How much in area is 3000 meters?
3 KM
25 newtons over an area of 5 meters?
"5 meters" is not an area.If the area is 5 square meters, then you're describing a pressure of 5 pascals.
Solve for pressure when given a force of 20 new tons on an area of 5 meters by 2 meters?
P = F/A = 20/(5*2) = 2 Pascals.
How many total square meters if the floor area is 313 square meters?
If the floor area is 313 square meters, then the floor area is 313 square meters.
13.86km long by 3 meters wide what is the area in square meters?
The area is 41,580 square meters.
What is the pressure exerted on the floor by a 3000N crate with an area of 2m squared?
Pressure is the force on something per unit area. P = F/area If using SI units (which we are) then it's measured in Pascals (N/m(sq)) Assuming your crate is applying it's force evenly and that it is on a flat floor then it's just 3000/2 = 1500 Pa. Fun to be had tipping your crate up onto a corner (say about a cm square in contact) so it then produces a force of 3000/0.01 = 300,000 Pa This is why thin girls in stiletto heeled shoes leave marks on floors....
How much in area is 3000 meters?
3 KM
How do you work out the area of 3000 sq meters?
3000 square metres is already expressed as an area. There are no further calculations to make unless you are intending to convert it into a different unit of area.
How many square meters is 3000 miles?
This is not a sensible question, because square meters measure area and miles measure length.
25 newtons over an area of 5 meters?
"5 meters" is not an area.If the area is 5 square meters, then you're describing a pressure of 5 pascals.
How do you convert linear meters to meters I want to convert 3000 Linear meter to meter?
A linear meter is exactly the same as a meter. So, 3000 linear meters = 3000 meters. "Linear" is just an unnecessary adjective to be used only if there is some doubt whether you are refering to a length (meter, m), area (square meter, m2) or volume (cubic meter, m3).
How does pressure depend on area and force?
Pressure gradiant force is the change of pressure measured across a given distsnce, resulting ina net force moving from high to low pressure and is responsible for the initial movement of air.
How force is different from pressure?
Pressure is force divide by unit area. Thus, if you have an air pressure of 100,000 Pascal, that means you have a force of 100,000 newton over an area of 1 square meter. It also means there is a force of 200,000 newton over an area of 2 square meters, a million newton over an area of 10 square meters, etc.
How many meters in 3000 sf?
A metre is a unit of length. A square foot is a unit of area. The two units are therefore incompatible.
There are 9 newtons on a table The book occupies an area that is 0.3 square meters What is the pressure exerted by the book on the table in pascals?
Pressure = Force/Area Pressure = 9 Newtons/0.3 m2 Pressure is 30 Pascals
What force acting on an area of 0.5 meter will produce a pressure of 500 pascal?
0.5 meter is not an area, that's a length. In general, the relation is: pressure (in pascal) is force (in newton) divided by area (in square meters).
Large area with common characteristics in japan?
The area between Tokyo, Nagano, and Nagoya is where the highest mountains in Japan are. No other place in Japan has mountains as high as 3000 meters except that ares.
