The answer depends on the type of transistor, how intensively it is used as well as the manufacturer.
z score = (400-500)/80=-1.25 probability under curve to right of -1.25 = .8944
before the invention of transistor,thyristor was used instead of transistor but thyristor produces more heat in the circuit and size is more when compared to transistor
Power transistor can conduct large amount of currents through it, more than small signal transistor. power transistor has a vertical structure and small signal transistor has horizontal structure.In power transistor quasi saturation region is present which is absent in the small signal transistor. In power transistor there is a inculsion of drift layer which is not there in the small signal transistor. Power dissipation is less in power transistor and it is more in small signal transistor. b.v.polytechnic,vasai pushkar vaity.
A Darlington transistor is a composite transistor. The definition is a combination of two or more transistors that have the purpose of increasing the current gain.
If it's a germanium transistor, 0.3 volts. If it's the more common silicon transistor, slightly more than 0.6 volts.
. The iPad can last 15 hours or more
In CE transistor volteage divider biasing is used, which is independent of temperature and other parameters.
The transistor is a replacement for vacuum tubes, which is smaller, cheaper, and more reliable for most purposes.
Smooth clear sound comes from IC and transitor has more loudness and more bass and also consumes more electricity , transistor is good for outdoor used but if u love more loudness then try transistor
Here are some songs with transistor radio in the title and there are probably many more: Transistor Sister by Freddy Cannon Twisted Transistor by Korn Transistor Radio ... three songs by Cloud Cult, Jaya the Cat, and The Methadones Tiny Blue Transistor Radio by Connie Smith
Yeah than can last more than 5 hours unless it's being used to much of it and they can last up to a week or two believe or not.
Emitter biasing is when you add a resistor between the emitter of a transistor and the 0v rail so that any voltage developed across the emitter will subtract from the voltage on the base and effectively turn the transistor OFF. We are talking about an NPN transistor and the transistor is an "ordinary transistor" or BJT (bi-polar Junction Transistor). For more information on transistor biasing see: Talking Electronics website.