Want this question answered?
well one is dry and one is wet
rub uit with a towel
the purpose is how is is getting bigger
because there is dry
nothing
To dry clothes
Running a pump dry will not damage the motor bearings at all. It is the pump seal that gets damaged. Some of the more modern pumps have enough water in them to allow the pump to run dry for quite a long time before seal damage occurs. It is the heat build up from the friction on the seal that causes failure. If you have run your pump dry and see any leakage at all, replace the seal immediately. The leaking water may "crawl" up the motor shaft and that is what will damage the motor bearings.
Yes, ideally it should be dry but a little oil on it will not hurt.
First they freeze dry it, and then they vacuum seal it in a special bag.
If you have dry seals, if have at least leakage because a dry seal cannot prevent oil to come out. Also if you have cracks in seals it mean you should replace it.
Hi to seal a leak in a pond you need to # Drain the pond # allow it to totall dry # get a pool puncture repair # stick it onallow it to dry 2-3 hours to be safe # fill up your pond
You can can the food, freeze it, dry it, and even vacuum seal it.