0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many tons of one inch stone to do 100 sq ft 3 inches deep?
that's roughly a cubic yard of rock. . .ask the rock dealer what a yard of rock weighs most places will only deliver by half ton, ton. . .etc
How many feet is WWE the rock?
The rock is 6 and a half foot
How many square feet will 18 kg of 2 inch landscape rock cover?
It depends on what kind of rock it is.
If 20 inch round hole is filled with rock 6 inches deep what is the cubic feet of rock in the hole?
I say 1.09 cu ft.
How many square feet does a yard of 6 inch rock cover?
it covers 1/3 of a mile
How many yards of half inch rock in a ton?
1
How big is a crack rock?
A crack rock can be almost any size. Usually about half an inch in diameter.
What is the history of sheet rock?
Sheet rock? Never heard of it. Must be a paperweight for sheets.
What are the codes to get past prealgebra caching answer sheet?
sheet rock
Can you use tar on sheet rock?
Tar will stick to sheet rock provided the surface is free from grease and dust.
Where can you find party rock anthem violin sheet music?
vilion party rock anthem sheet music
What type of insulation has the highest R value?
As strange as it may sound dead or still air is one of the best insulators. Insulation such as fiberglass or rock wool and styrofoam work because they are fluffy with trapped air. If you have a sheet of four inch thick R40 fiberglass and squeeze it into a wall made of 2X3 studs you will have less R value than than a 3 inch piece of fiberglass insulation. So the highest R value goes to the insulation that traps the most dead air per inch of thickness and is installed propperly.
How much to charge to hang sheet rock?
12.00 labor a sheet
How thick are average sheet rock walls?
Interior sheet rock walls are normally 4-1/2" thick.
How high do you need to pile three hundred thousand tons of half inch rock salt in a one hundred foot by one hundred foot area?
There is no way of determining this. You can't give a weight and expect people to know how many pieces of half inch rock salt there are. You're an idiot for asking, you lose 4 internet points.
How do you rehang a towel rack that has been yanked out of the wall?
If there is enough sheet rock damage that you need to patch you could cut the sheet rock enough to put in some 2x4 or 2x6 backing. You can "toe" screw the backing into place with some 3 inch deck screws. Then patch, texture, and paint. This should prevent the problem from happening again.
Is rock when hammered will become a flat sheet?
No, it will not.
