The answer will depend on the paint as well as its coverage.
Ceramic 12kg per m2 Porcelain (8mm thick) 20kg per m2 Porcelain (10mm thick) 25kg per m2 Natural Stone (10mm thick) 28kg per m2 Natural Stone(20mm thick) 35kg per m2
Approximately 1.4864 m2 There are 10.7639104 ft2 per m2
Use this conversion: rate per liter x 3.785 = rate per US gallon
4,5 (mol/L)/s
Multiply the 30 by 30.48 (cm per linear foot) and you get 914.4 cm. 914.4 squared is 836127.36 cm2. Divide that by 10,000 (cm2 per m2) and your answer is 83.612736 m2.
4 per square metre.
wall and ceiling single coat 120 m2 per day average
Ceramic 12kg per m2 Porcelain (8mm thick) 20kg per m2 Porcelain (10mm thick) 25kg per m2 Natural Stone (10mm thick) 28kg per m2 Natural Stone(20mm thick) 35kg per m2
12 kg/m2
(1.08W/cm2)(10-3kW/W)(104cm2/m2)=10.8W/m2.
White Oak Veener Is priced per m2 £1.05 per m2
There are 10 concrete block per m2.
A = pi*r2 Differentiating with respect to time, t dA/dt = pi*2r*dr/dt That is, rate of change in area = pi*2*10*2 m2 per second = 125.66 m2 per second Incidentally, 2m / second is a pretty fast wave in water.
gets put on at the rate of 320-340 feet per gallon of actual paint line
In which regard? The AK-47 has a rate of fire of about 700 rounds per minute - the more common AKM (often mistakenly referred to as an AK-47) has it reduced to 600 rounds per minute. The Browning M2 HBAR machine gun has a rate of fire of 450 to 575 rounds per minute, while the A/N M2 fires up to 850 rounds per minute, and the A/N M3 variant fires up to 1200 rounds per minute.
On full auto about 850 rounds per minute. However, the M2 was the full auto - the M1 was semi auto only, and the rate of fire was as fast as one could pull the trigger.
divide 15 by 1.3 =11.5. So you will need 12 cans for your first coat. Second coats take less.