answersLogoWhite

0


Best Answer

the meter socket should be 1.8m from finished ground

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the recommended height of a meter socket from the ground?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What might be wrong with the license plate lights on a 1996 Chevy Tahoe if you already replaced the bulbs and the fuse is not blown and electricity is getting to the wiring?

It is probably a faulty ground connection to the socket. Take an ohm meter and ground to the chassis of the vehicle and then touch the other lead to the shell of the socket base. If the meter DOES NOT read zero (or very close to it) the ground connection is bad and needs to be fixed.


If all your turn signals work except one and you replaced the bulb and all fuses what do you do next?

With a volt meter check to see if you have power to that socket. Check at the wire not the socket. If you find you have power, either the socket is corroded or broken. Also check the ground connection at that socket.


What is a meter socket?

The electrical power that you use from the utility company has to be metered. This is done with a plug in watt meter. The meter socket is what holds the electrical watt meter. It is this meter that the meter reader reads to give you your monthly billing for the electricity that you used.


How do you fix a headlamp when you know its not the bulb that isn't burned out?

You can test with a multi-meter to make sure you have 12 volts across the socket. Be sure the headlights are turned on when you test. If you don't have 12 volts, turn off the headlights and switch your meter to Ohms or Continuity. Check between a good frame ground and each side of the socket. You should see full scale deflection if there is a good ground. If you don't see the deflection, you have a bad ground to the socket. If you do see it, but don't see the 12 volts from the first test, there is a good possibility that the headlight switch needs to be replaced.


A meter is the height of what?

1 meter = 3.281 ft


What is the recommended height of a driving range bay?

for a 3 meter long bay the back should be 3.4 meters and should rise at a pitch of least 10 degrees to the front


What measure 1 meter?

Meter is a measure of length. A typical adult will have a height of 1.50 - 1.80 meters. A child can have a height of about 1 meter.Meter is a measure of length. A typical adult will have a height of 1.50 - 1.80 meters. A child can have a height of about 1 meter.Meter is a measure of length. A typical adult will have a height of 1.50 - 1.80 meters. A child can have a height of about 1 meter.Meter is a measure of length. A typical adult will have a height of 1.50 - 1.80 meters. A child can have a height of about 1 meter.


Why would all your turn signals work except the right rear one even if it now has a new bulb and new fuses?

hi my name is josh i had the same problem check the terminals in the light socket they could be corroded that was my problem.... With a volt meter check to see if you have power to that socket. Check at the wire not the socket. If you find you have power, either the socket is corroded or broken. Also check the ground connection at that socket.


Is the height of a flagpole 6 meter or 600 meter?

6 metres!


What is the base unit for height?

The meter.


What is the volume of a cube that has a height of 1 meter a width of 1 meter and a depth of 1 meter?

1 meter cubed


How do you safely remove a watt meter when the meter socket is energized?

First, shut off all power to your house.