More of an oval shape.
A hollow cylinder.
Toilet seats can vary in size and shape depending on the brand and model of the toilet. They are not universal and may require specific measurements for a proper fit.
A hollow cylinder.
Feces tends to appear twisted or curvy due to the shape of the intestines, the shape of the rectum, and the shape of the toilet. Despite drawings, fecal matter does not come out in a cone-shaped coil. Feces is rather soft when it first comes out, so if it is lengthy and hits the toilet, it will change shape.
Toilet tanks are not always interchangeable with each other because they can vary in size, shape, and design. It is important to check the specifications of the toilet tank you are replacing to ensure compatibility with your existing toilet bowl.
It is adviseable to do so. The seal is pressed into shape after the toilet is installed, if the seal is reused it may not seal because the seal has already been compressed.
sphere (shape of a normal ball like basketball, football etc.) and cylinder (shape of toilet roll or can drink)
To determine the correct size of a toilet seat to purchase, measure the distance between the two mounting holes at the back of the toilet bowl. This measurement will help you choose a toilet seat that fits securely on your toilet. Additionally, consider the shape of your toilet bowl (round or elongated) to ensure a proper fit.
a cylinder is like a toilet paper roll, exact same shape except some may be bigger or some smaller,
No, the water in a toilet does not spin one way in the northern hemisphere and spin the opposite direction in the southern hemisphere. The spin of the water in a toilet is determined by the shape of the toilet bowl and the flush system, not by the direction of the Earth's rotation. In a toilet, the water is flushed by a flushing mechanism. This flushing mechanism is usually activated by pushing a lever or pushing a button, and it causes water to be released from the tank into the bowl. The shape of the toilet bowl, as well as the type of flushing mechanism, determines how the water will move once it enters the bowl. When the toilet is flushed, the water quickly fills the bowl and then begins to swirl around. The force of the swirling water will cause it to push against the sides of the bowl and create a whirlpool effect. As the water circles around the bowl, the shape of the bowl determines the direction in which the water will spin. The water will usually spin in a clockwise direction in the northern hemisphere and in a counterclockwise direction in the southern hemisphere. The spin of the water in a toilet is determined by the shape of the toilet bowl and the type of flushing mechanism, not by the direction of the Earth's rotation. The shape of the bowl and the type of flush system will determine the direction in which the water will spin, regardless of which hemisphere the toilet is located in.
This obviously depends on the difficulty of the job and how much time you have to spend on it. Is this a new installation, or do you just want to replace an old toilet? Have the old toilet been removed? Is the water line in good shape? Does it connect easily to the new toilet, or do you have to modify it. Is the flooring under the toilet in good shape? Most plumbers charge by the hour and the going rate depends on the locality. In the best case, putting in a toilet is pretty simple. Sometimes toilets are put into cramped places and it is physically difficult to make the water connections.
When choosing a toilet seat, consider the shape and size of your toilet bowl. Measure the distance between the mounting holes and the shape of the bowl (round or elongated). Look for a seat that matches these specifications for a proper fit. Additionally, consider factors like material, color, and features such as soft-close hinges or built-in bidet functions.