0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a square that is one unit wide and one unit long?
Square unit
How do you measure the square footage of a decagon?
It depends first of all on whether or not the decagon is regular. If it is not regular, there are two main options: one is to divide it into sections for which there are simple formulae, and sum the results. The alternative is to copy the shape onto a lamina of uniform mass, measure the mass (or weight) of the shape and of a square of unit size and use the ratio of the masses to estimate the area of the shape. Area of shape = (Mass of copied shape/Mass of unit square)*Area of unit square The last term has value 1, but is included so that the equation is balanced in its dimensions. If the shape is regular, then it depends on what information is given.
How many square meters is 80ft?
You can't convert that. You can convert from one linear unit to another linear unit, or from one square unit to another square unit, but not between linear units and square units.
How do you find the area of a irregular quadrilateral without breaking it apart?
I do not believe that it can be done. You can get an estimate using either of the following methods:Uniform Lamina: Copy the shape onto a sheet (lamina) of material with uniform density. Cut the shape out carefully and measure its mass (or weight). Do the same for a unit square of the lamina. Then, because the lamina is of uniform density, the ratio of the two areas is the same as the ratio of the two masses. That is: Area of Shape/Area of Unit Square = Mass of Shape/Mass of Unit Square. Rearranging, and noting that the area of the Unit Square is, by definition, = 1 sq unit Area of Shape = Mass of Shape/Mass of Unit Square. Grid Method: Copy the shape onto a grid, where each grid square has an area of G square units. Count the number of squares that are fully or mostly inside the shape. Call this number W (for whole). Count the number of squares that are approximately half inside the shape and call this number H (for half). Ignore any square that are less than half in the shape. Then a reasonable estimate of the area of the shape is G*[W + H/2] square units. There is some arbitrariness about “mostly inside†and “approximately half†but there is no way around that. You will get more accurate results with finer grids, but they will also require much more effort in terms of counting the grid squares.
How many sq ft in an inch?
There cannot be square feet in an inch. One is an area unit and one is a length unit. Square feet belong to square inch.
Does the area of a shape have to be called a square unit?
Yes.
What is a square that is one unit wide and one unit long?
Square unit
How do you measure the square footage of a decagon?
It depends first of all on whether or not the decagon is regular. If it is not regular, there are two main options: one is to divide it into sections for which there are simple formulae, and sum the results. The alternative is to copy the shape onto a lamina of uniform mass, measure the mass (or weight) of the shape and of a square of unit size and use the ratio of the masses to estimate the area of the shape. Area of shape = (Mass of copied shape/Mass of unit square)*Area of unit square The last term has value 1, but is included so that the equation is balanced in its dimensions. If the shape is regular, then it depends on what information is given.
What is the perimeter of a square if the area is ten inches?
The area of any shape should be in SQUARE unit, and not only unit. So the question is wrong!
How many square meters is 80ft?
You can't convert that. You can convert from one linear unit to another linear unit, or from one square unit to another square unit, but not between linear units and square units.
A square with a side length of one unit is called?
A square with the side length of one unit is called a
How many hectar are 320 meters?
You can't convert that. You can convert from one linear unit to another linear unit, or from one square unit to another square unit, but not between linear units and square units.
Find square footage of odd shape?
The answer depends on the nature of the complex shape. Some complex shapes can be decomposed into smaller shapes whose areas can be determined using standard formulae. It is then simply a question of adding the parts together. For more complicated shapes, there are essentially two options: you can either use uniform laminae and mass or estimate the area using grids.Uniform Lamina: Copy the shape onto a sheet (lamina) of material with uniform density. Cut the shape out carefully and measure its mass (or weight). Do the same for a unit square of the lamina. Then, because the lamina is of uniform density, the ratio of the two areas is the same as the ratio of the two masses. That is: Area of Shape/Area of Unit Square = Mass of Shape/Mass of Unit Square. Rearranging, and noting that the area of the Unit Square is, by definition, = 1 sq unit Area of Shape = Mass of Shape/Mass of Unit Square.Grid Method: Copy the shape onto a grid, where each grid square has an area of G square units. Count the number of squares that are fully or mostly inside the shape. Call this number W (for whole). Count the number of squares that are approximately half inside the shape and call this number H (for half). Ignore any square that are less than half in the shape. Then a reasonable estimate of the area of the shape is G*[W + H/2] square units. There is some arbitrariness about "mostly inside"Â and "approximately half"Â but there is no way around that. You will get more accurate results with finer grids, but they will also require much more effort in terms of counting the grid squares.
Calculate 16x32x6.50 in square feet?
Square feet are a measurement unit for area. It is not clear what shape the three numbers in the question refer to.
How do you square footage?
Square footage is a measure of area. There are formulae for some simple shapes but for more complicated shapes there are essentially two options: you can either use uniform laminae and mass or estimate the area using grids. Uniform Lamina: Copy the shape onto a sheet (lamina) of material with uniform density. Cut the shape out carefully and measure its mass (or weight). Do the same for a unit square of the lamina. Then, because the lamina is of uniform density, the ratio of the two areas is the same as the ratio of the two masses. That is: Area of Shape/Area of Unit Square = Mass of Shape/Mass of Unit Square. Rearranging, and noting that the area of the Unit Square is, by definition, = 1 sq unit Area of Shape = Mass of Shape/Mass of Unit Square. Grid Method: Copy the shape onto a grid, where each grid square has an area of G square units. Count the number of squares that are fully or mostly inside the shape. Call this number W (for whole). Count the number of squares that are approximately half inside the shape and call this number H (for half). Ignore any square that are less than half in the shape. Then a reasonable estimate of the area of the shape is G*[W + H/2] square units. There is some arbitrariness about “mostly inside†and “approximately half†but there is no way around that. You will get more accurate results with finer grids, but they will also require much more effort in terms of counting the grid squares.
What 3d shape has one square?
A square based pyramid is one possibility.
What shape has one square base?
A square based pyramid.
