0
It depends on the total load of the transistor as to what the shape of the slope is for the DC load line. A transistor gains voltage as base current is allowed to flow.
What else can I help you with?
What is DC load line of a transistor?
A: A transistor has voltage gain as base current is allow to flow. If the load is constant then a DC mirror azimuth path can be plotted as a function of base current and collector current and that is the load line
What is a load line of transistor?
what is load line of transistor what is load line of transistor
What are Ac load lines in an amplifier and how they are drawn?
The dc load resistance is Rc but the AC Load resistance is (RcRl). If a load line is drawn the slope of which is -1(Rc Rl) . Then it is called an AC load line and it is to be used when the transistor is operating as an amplifier.
What is the significance of dc load line in a transistor?
A load line is used in graphic analysis of circuits, having both linear and non-linear parts, representing the constraint the other parts of the circuit put on the non-linear transistor. It represents the response of the linear circuit connected to the transistor. The DC load line describes the DC operation of a transistor graphically.
Aim of load line analysis of a transistor amplifier?
to achieve quiecent operating point
Quiescent operating point of a transistor amplifier lies in?
It lies in middle of the DC load line of that Amplifier.
What dc load line?
well, this is very simple to understand ,the DC load line of a circuit is nothing but the Kirchoff's voltage law on the out put circuit of the transistor-amplifier. As the KVL is linear equation involving voltage drops the equation of load line is a straight linelet us assume that the transistor is in CE configuration.VCC-VCE-ICRC=0vICRC=VCC-VCE of the form by=aX+c which is in the form of a straight line with positive intercepts on X(VCC) and Y(VCC / RC) axis and a negative slopewhere,x= VCE/RCy= ICm(slope)= -VCC/RC
What is difference between AC and DC load line?
A dc load line is formed by joining the 2 points wherin the slope is equal to the inverse of the load resistance.. whereas the ac load lin has a different slope... and it intersects the dc load line at the quiescent point.
What are the biasing roles of transistor?
A: Transistor to be effective as an linear amplifier it must be operated in its linear load range. The biasing scheme is to insure that the transistor is put in its linear/load range
What is q-point of transistor?
The operating point of a device, also known as bias point or quiescent point (or simply Q-point), is the DC voltage and/or current which, when applied to a device, causes it to operate in a certain desired fashion. The term is normally used in connection with devices such as transistors and diodes which are used in amplification or rectification.
How does a transister work as an amplifier?
The name is your clue: a transistor and a resistor (the load) are put in series. The output signal is taken from the load resistor. A small input signal (to the third lead of the transistor) will cause the transistor to change resistance ... thus you can get a large output from a small input Amplification.
How do you draw DC load line and determine the Q point?
we should be take two point from the the graph between collector current and emitter-collector voltage.. along the horizontal line collector current is zero and emitter-collector voltage become Vcc,and along the vertical line emitter-collector voltage is zero and collector current become Vcc/RL then by this line that drow between this two point is called load line that in this line the transistor allowed to operate....
