The absolute error can be as large as 1.5
This is the measurement recorded when, in fact, it should be 0. It is the measurement when there is nothing to measure but the reading is not exactly 0 because the calibration has gone off.
By definition of percent error, you can't. But you can approximate zero instead, with the number of decimals appropriate to the accuracy of the measurement, e.g. 0.01, 1E-100, etc.
degrees (0)
0
-235
This is the measurement recorded when, in fact, it should be 0. It is the measurement when there is nothing to measure but the reading is not exactly 0 because the calibration has gone off.
The waist measurement for women's size 0 American Eagle jeans is 24.5 inches. This is based off the international size chart on the American Eagle website.
In America a 23 inch waist equal size zero.
p=mv %errror in p= %error in m+%error in v lowest value of m=0 hence %error in velocity=100% k.e=%error in mass=2*%error in velocity K.E=200% similarly K.Eminimun=100% total error in K.E = 100+200 =300 hence error in ke = 300%
By definition of percent error, you can't. But you can approximate zero instead, with the number of decimals appropriate to the accuracy of the measurement, e.g. 0.01, 1E-100, etc.
Their website suggests 33-34.
no 0
By keeping Ur eyes perpendicular to the vernier and main scale while taking the measurement.
The micrometer must be checked for any 0 error. There are 2 types of errors in micro meter one is the +ve 0 error while the other is the - ve 0 error. Before placing the object to be measured b/w the anvil and the spindle, turn the thimble until the anvil and the spindle meet. If the 0 mark on the thimble scale lies directly opposite the datum line of the main scale, we say that there is no 0 error. But if 0 goes down the datum line it is known as +ve 0 error ,similarly. when 0 goes up from the datum line it is known as -ve 0 error.To make your reading pure from error;subtract the 0 error from the total reading, if it is +ve error.add the 0 error in the total reading ,if it is -ve error.
The 0 point from which the measurement begins. A+ Class
no 0
0 degrees 108 degrees